首页 | 本学科首页   官方微博 | 高级检索  
     

焊缝区焊接热循环测试程序系统的设计
引用本文:胡艳华,陈芙蓉,解瑞军,李海涛.焊缝区焊接热循环测试程序系统的设计[J].焊接学报,2010,31(5):93-96.
作者姓名:胡艳华  陈芙蓉  解瑞军  李海涛
作者单位:内蒙古工业大学材料科学与工程学院,呼和浩特,010051
基金项目:内蒙古自然科学基金资助项目
摘    要:自行设计了焊缝区焊接热循环测试的程序系统.该程序系统由焊接数据库模块、焊接热循环基础数据采集模块、焊接热循环参数计算模块三大模块组成,集信号自动采集、存储及运算处理等功能于一体,并可以以适当的形式显示或记录测试结果.试验过程中保持同一加热速度不变,实测得到的10CrMo910钢焊缝区焊接热循环的峰值温度和由测试程序得到的峰值温度相差不大,且均较已报道的10CrMo910钢焊接热影响区热循环的峰值温度有较大提高.同时,由测试程序可以更加快捷地获得试验结果.自行设计的程序可以满足实验室进行材料焊接性评定研究的需要.

关 键 词:焊缝区  焊接热循环  测试程序系统
收稿时间:2009/3/30 0:00:00

Designment of test program system for welding thermal cycle in weld zone
HU Yanhu,CHEN Furong,XIE Ruijun and LI Haitao.Designment of test program system for welding thermal cycle in weld zone[J].Transactions of The China Welding Institution,2010,31(5):93-96.
Authors:HU Yanhu  CHEN Furong  XIE Ruijun and LI Haitao
Affiliation:College of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot 010051, China,College of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot 010051, China,College of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot 010051, China and College of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot 010051, China
Abstract:A computer-aided system to test and analyze welding thermal cycle in weld zone was developed in this paper.The software is composed of three modules of welding data base module,basic data collection module and parameters calculation module.It can automatically collect,save,process,display or record the test results.Under the same heating rates,the maxi-mum temperature of 10CrMo910 steel welding thermal cycle in weld zone,which was obtained by actual measurement,was ap-proximately equal to that by the developed system,and both of them were highly greater than the reported results about heat af-fected zone.The self-programmed software can meet the need to study the assessment on material weldability.
Keywords:weld zone  welding thermal cycle  test program system
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号