| 表面纳米化对SS400钢焊接接头应力腐蚀性能的影响 |
| |
| 引用本文： | 李东,陈怀宁,徐宏.表面纳米化对SS400钢焊接接头应力腐蚀性能的影响[J].焊接学报,2009,30(3):65-68. |
| |
| 作者姓名： | 李东 陈怀宁 徐宏 |
| |
| 作者单位： | 1. 华东理工大学,化学工程联合国家重点试验室,上海,200237
2. 中国科学院金属研究所,沈阳,110016 |
| |
| 摘 要： | 采用高能喷丸技术在SS400钢焊接接头表面层上制备纳米结构,利用透射电子显微镜分析研究了表面纳米晶层的结构特征,并利用XRD对高能喷丸表面纳米化处理后表面层残余应力进行了分析.同时,应用慢应变速率拉伸试验研究了SS400钢焊接接头在敏感腐蚀介质硝酸盐溶液(98℃±3℃温度下,57%Ca(NO3)2+3%NH4NO3)中的应力腐蚀(SCC)行为.结果表明,经过高能喷丸处理后,试样表层的晶粒可细化至大约10 nm,且在表面形成残余压应力;高能喷丸表面纳米化可以提高SS400钢焊接接头抗硝酸盐溶液SCC性能.
|
| 关 键 词： | SS400钢焊接接头 高能喷丸 表面纳米化 应力腐蚀 |
| 收稿时间： | 2008/7/11 0:00:00 |
Effect of surface nanocrystatllization on stress corrosion cracking of SS400 welded joint |
| |
| LI Dong,CHEN Huaining and XU Hong.Effect of surface nanocrystatllization on stress corrosion cracking of SS400 welded joint[J].Transactions of The China Welding Institution,2009,30(3):65-68. |
| |
| Authors: | LI Dong CHEN Huaining and XU Hong |
| |
| Affiliation: | 1.State-Key Laboratory of Chemical Engineering;East China University of Science and Technology;Shanghai 200237;China;2.Institute of Metal Research;Chinese Academy of Sciences;Shenyang 110016;China |
| |
| Abstract: | A nanostructured surface layer was fabricated by means of high energy shot peening(HESP) on SS400 steel welded by metal active gas welding process.The refined microstructure in the top surface layer was characterized with transmission electron microscopy,and the residual stress was examined with XRD at the same time.Experimental results show that after the HESP treatment the coarse grains of the surface layer may be refined down into-10 nm scale,and the compressive residual stress on the surface layer be in... |
| |
| Keywords: | SS400 steel welded joint high energy shot peening surface nanocrystallization stress corrosion cracking |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
