首页 | 本学科首页   官方微博 | 高级检索  
     

基于PCA-SVM方法的点焊质量评估
引用本文:张宏杰,侯妍妍. 基于PCA-SVM方法的点焊质量评估[J]. 焊接学报, 2009, 30(4): 97-100
作者姓名:张宏杰  侯妍妍
作者单位:天津工业大学,机械电子学院,天津,300160;河北省行政学院,建筑工程系,石家庄,050031
摘    要:通过对电阻点焊过程电极位移和动态电阻信号的实时采集和时域特征分析,利用电阻信号动态特征刻画熔核形成不同阶段,从同步电极位移信号中提取9个特征参量建立输入样本数据集.以焊点接头抗剪强度作为焊点质量的评价指标,将PCA(主成分分析)方法与传统的SVM(支持向量机)回归分析相结合,利用PCA方法对支持向量机的输入样本数据集进行主成分分析,消除了输入特征参量间的自相关性,实现数据降维后作为支持向量机的输入,建立焊点质量映射模型.交叉有效性预测结果表明,基于PCA-SVM的算法增强了SVM的泛化能力,比传统的SVM算法具有更高的预测精度.

关 键 词:电阻点焊  主成分分析  支持向量机  回归分析
收稿时间:2008-01-04

Quality evaluation of the resistance spot welding based on PCASVM
ZHANG Hongjie and HOU Yanyan. Quality evaluation of the resistance spot welding based on PCASVM[J]. Transactions of The China Welding Institution, 2009, 30(4): 97-100
Authors:ZHANG Hongjie and HOU Yanyan
Affiliation:1.School of Machinery and Electron;Tianjin Polytechnic University;Tianjin 300160;China;2.Department of Architecture Engineering;Hebei College of Administration;Shijiazhuang 050031;China
Abstract:The electrode displacement and dynamic resistance signals of resistance spot welding process are collected synchronously.Through the time-domain analysis of electrode displacement signal in the welding process,nine characteristic parameters relating to weld quality are picked up to set up a set of data which characterizes the input samples,on the basis of the different phase of nugget forming marked by simultaneous dynamic resistance signal.The principal component analysis(PCA) to remove the self-correlatio...
Keywords:resistance spot welding  principal component analysis  support vector machine  regression analysis  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号