| 基于Pro/E的相贯曲面堆焊运动仿真分析 |
| |
| 引用本文： | 王新辉,于丹,杨克非,孟兆林.基于Pro/E的相贯曲面堆焊运动仿真分析[J].焊接学报,2011,32(2):72-76. |
| |
| 作者姓名： | 王新辉 于丹 杨克非 孟兆林 |
| |
| 作者单位： | 机械科学研究总院,哈尔滨焊接研究所,哈尔滨,150080 |
| |
| 基金项目： | 机械科学研究总院技术发展基金项目(200910126) |
| |
| 摘 要： | 针对石油钻采专用阀门内壁复杂曲面的自动堆焊,在堆焊设备的研发过程中,建立了阀门内肇相贯曲线的数学模型,规划了堆焊焊枪的运动轨迹.在Pro/E软件工作环境下,建立了堆焊设备的三维实体模型,定义了运动连接,设定了伺服电机参数,进行了堆焊设备虚拟样机的计算机运动仿真试验,通过仿真分析,生成了运动轨迹曲线并进行了仿真误差分析,...
|
| 关 键 词： | 石油钻采阀门 相贯曲面 运动仿真 轨迹曲线 |
| 收稿时间： | 2010/10/27 0:00:00 |
Analysis of intersection surface welding motion simulation based on Pro/Engineer |
| |
| WANG Xinhui,YU Dan,YANG Kefei and MENG Zhaolin.Analysis of intersection surface welding motion simulation based on Pro/Engineer[J].Transactions of The China Welding Institution,2011,32(2):72-76. |
| |
| Authors: | WANG Xinhui YU Dan YANG Kefei and MENG Zhaolin |
| |
| Affiliation: | WANG Xinhui,YU Dan,YANG Kefei,MENG Zhaolin (Harbin Welding Institute,China Academy of Machinery Science & Technology,Harbin 150080,China) |
| |
| Abstract: | In the development process of automatic welding equipment which is used for the complex inner surface welding in petroleum drill special-purpose valve,the mathematic model of valve inner surface intersection curve was modeled,and the motion trajectory of welding gun was planned.The 3D model of the welding equipment based on Pro/Engineer working environment was established,the definition of the motion jointing and the parameters of servo motors were set,the virtual prototype motion simulation experiment of t... |
| |
| Keywords: | petroleum drill valve intersection surface motion simulation trajectory curve |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
