首页 | 本学科首页   官方微博 | 高级检索  
     

基于Canny算子的焊缝图像边缘提取技术
引用本文:谢志孟,高向东.基于Canny算子的焊缝图像边缘提取技术[J].焊接学报,2006,27(1):29-32,36.
作者姓名:谢志孟  高向东
作者单位:广东工业大学,机电工程学院,广州,510090
基金项目:中国科学院资助项目 , 广东省博士启动基金
摘    要:焊缝边缘是焊缝图像的最主要特征,选用适当的边缘检测算子得到准确的焊缝信息是焊缝图像处理的关键步骤.选用并研究Canny算子来提取焊缝的边缘特征,详尽地叙述Canny算子的基本原理和算法实现过程.最后为了验证Canny边缘检测算子的效果,分别用Canny、Kirsch、Prewitt、Robert、Sobel和Gauss-Laplace算子对焊缝图像进行边缘检测试验,根据边缘处理结果和焊缝中心坐标图像,得出Canny边缘检测算子是边缘检测的一种十分有效的方法,适合于视觉传感的焊缝跟踪图像处理过程.

关 键 词:Canny算子  边缘检测  焊缝跟踪  图像处理
文章编号:0253-360X(2006)01-29-05
收稿时间:2004-10-08
修稿时间:2004-10-08

Edge detection of weld image based on Canny operator
XIE Zhi-meng and GAO Xiang-dong.Edge detection of weld image based on Canny operator[J].Transactions of The China Welding Institution,2006,27(1):29-32,36.
Authors:XIE Zhi-meng and GAO Xiang-dong
Affiliation:Department of Mechanical and Electrical Engineering, Guangdong University of Technology, Guangzhou 510090, China and Department of Mechanical and Electrical Engineering, Guangdong University of Technology, Guangzhou 510090, China
Abstract:Weld edge is the most important characteristic in a weld image.The fact of selecting an appropriate edge-detecting operator and obtaining the accurate weld edge information is a key process in weld image processing.The canny operator was used to extract the weld edge,and its principle and implementation were discussed.And the canny operator,kirsch operator,prewitt operator,robert operator,sobel operator and gauss-laplace operator were applied in detecting the weld edges to test the effects,respedively.The analyzsis of the weld image and weld center coordinates showed that the canny operator is a very effective way to detect the weld edge,and also suitable for the seamtracking process based on vision sensors.
Keywords:Canny operator  edge detection  seam tracking  image processing
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号