| 1Cr18Ni9Ti与1Cr13不锈钢的焊接试验 |
| |
| 引用本文： | 赵勇桃,董俊慧,赵莉萍,麻永林,裴晓兵.1Cr18Ni9Ti与1Cr13不锈钢的焊接试验[J].焊接学报,2009,30(12):85-88. |
| |
| 作者姓名： | 赵勇桃 董俊慧 赵莉萍 麻永林 裴晓兵 |
| |
| 作者单位： | 1. 内蒙古科技大学,材料与冶金学院,内蒙古,包头,014010
2. 内蒙古工业大学,材料科学与工程学院,呼和浩特,010051 |
| |
| 基金项目： | 内蒙古科技大学校内资助项目 |
| |
| 摘 要： | 通过钨极氩弧焊方法,对 1Cr18Ni9Ti 与 1Cr13 实施焊接.采用光学显微镜、扫描电镜对 1Cr13 马氏体型与 1Cr18Ni9Ti 奥氏体型不锈钢焊接接头进行金相组织、断口形貌观察及分析;利用显微硬度计、电子万能拉伸机测量焊接接头的力学性能;并通过海水模拟溶液浸泡试验,测量焊接接头极化曲线和交流阻抗谱.结果表明,通过手工钨极氩弧焊,采用直流正接接法,在合适的工艺下(焊接电流为 80 A,焊接速度为 110 mm/min),能够获得外观平整、组织均匀,力学性能与电化学性能符合要求的焊接接头.Abstract：The stainless steels of 1Cr18Ni9Ti and 1Cr13 were welded through deterministic craft by tungsten inert-gas (TIG) welding. The microstructure and fracture pattern of weld joints of 1Cr13martensite and 1Cr18Ni9Ti austenite stainless steels were observed and analyzed by means of LOM and SEM, the mechanical properties of the weld joints were measured with micro-hardness tester and electronic universal stretcher, and the polarization curves and AC impedance spectroscopy of weld joints were tested by seawater immersion test of simulation solution. The results show that adopting manual TIG welding through electrode negative to direct current soldering machine to weld 1Cr18Ni9Ti austenite stainless steel and 1Cr13 martensite stainless steel is feasible; under suitable process (welding current is 80 A, welding speed is 110 mm/min), weld joints can obtain good appearance and uniform structure; mechanical properties and galvano-chemistry properties can meet use requirements.
|
| 关 键 词： | 焊接接头 组织和性能 |
| 收稿时间： | 2008/7/29 0:00:00 |
Welding experiment on 1Cr18Ni9Ti and 1Cr13 stainless steels |
| |
| ZHAO Yongtao,DONG Junhui,ZHAO Liping,MA Yonglin and PEI Xiaobing.Welding experiment on 1Cr18Ni9Ti and 1Cr13 stainless steels[J].Transactions of The China Welding Institution,2009,30(12):85-88. |
| |
| Authors: | ZHAO Yongtao DONG Junhui ZHAO Liping MA Yonglin and PEI Xiaobing |
| |
| Affiliation: | Material and Metallurgy Engineering School, UST Inner Mongolia, Baotou 014010, China,Materials Science and Engineering, Inner Mongolia University of Technology, Huhhot 010051, China,Material and Metallurgy Engineering School, UST Inner Mongolia, Baotou 014010, China,Material and Metallurgy Engineering School, UST Inner Mongolia, Baotou 014010, China and Material and Metallurgy Engineering School, UST Inner Mongolia, Baotou 014010, China |
| |
| Abstract: | The stainless steels of 1Cr18Ni9Ti and 1Cr13 were welded through deterministic craft by tungsten inert-gas (TIG) welding. The microstructure and fracture pattern of weld joints of 1Cr13martensite and 1Cr18Ni9Ti austenite stainless steels were observed and analyzed by means of LOM and SEM, the mechanical properties of the weld joints were measured with micro-hardness tester and electronic universal stretcher, and the polarization curves and AC impedance spectroscopy of weld joints were tested by seawater immersion test of simulation solution. The results show that adopting manual TIG welding through electrode negative to direct current soldering machine to weld 1Cr18Ni9Ti austenite stainless steel and 1Cr13 martensite stainless steel is feasible; under suitable process (welding current is 80 A, welding speed is 110 mm/min), weld joints can obtain good appearance and uniform structure; mechanical properties and galvano-chemistry properties can meet use requirements. |
| |
| Keywords: | 1Cr13 1Cr18Ni9Ti |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
