首页 | 本学科首页   官方微博 | 高级检索  
     

Ni元素对Cr-Ni-Mo系高强焊缝组织演化的影响
引用本文:彭杏娜,彭云,田志凌,王涛.Ni元素对Cr-Ni-Mo系高强焊缝组织演化的影响[J].焊接学报,2014,35(9):32-36.
作者姓名:彭杏娜  彭云  田志凌  王涛
作者单位:1.钢铁研究总院先进钢铁流程及材料国家重点实验室, 北京 100081
基金项目:国家重点基础研究发展计划资助项目(973计划,2010-CB630800)
摘    要:主要利用金相显微镜(OM)、高分辨热场扫描电镜(FEGSEM)附带能谱仪(EDX)、透射电镜(TEM)等手段对不同Ni元素含量的高强钢焊缝组织及成分进行了观察分析,阐明了焊缝成分对组织的影响.利用Thermol-Calc热力学软件对两种焊缝的凝固模式进行了探讨.结果表明,随着Ni元素含量的提高,高强钢焊缝由板条贝氏体和马氏体为主的组织变为板条更细小的马氏体与粗大联合贝氏体的混合组织,而且焊缝硬度大大提高.Ni元素含量的增加提高了焊缝强度,并保持了良好的低温韧性.Ni元素含量的提高改变了焊缝的凝固模式,直接由液态转变为奥氏体,造成合金元素Mn和Ni在枝晶间偏析.

关 键 词:高强焊缝    微观组织    凝固模式    Ni元素
收稿时间:2013/6/9 0:00:00

Effect of Ni on the microstructure evolution of Cr-Ni-Mo series high strength weld metal
PENG Xingn,PENG Yun,TIAN Zhiling and WANG Tao.Effect of Ni on the microstructure evolution of Cr-Ni-Mo series high strength weld metal[J].Transactions of The China Welding Institution,2014,35(9):32-36.
Authors:PENG Xingn  PENG Yun  TIAN Zhiling and WANG Tao
Affiliation:1.State Key Laboratory of Advanced Steel Processes and Products, Central Iron & Steel Research Institute, Beijing 100081, China2.Beijing Institute of Structure and Environment Engineering, Beijing 100076, China
Abstract:The microstructure of the weld metal with different Ni contents was characterized and analyzed by using OM, FEGSEM equipped with EDX and TEM. The solidification mode was also discussed by Thermol-Calc software. The results show that with the increase of the Ni content, the microstructure mainly composed of lath bainite and lath martensite became the mixture of martensite and coalesced bainite. With the increase of the Ni content, the strength of weld metal increased and the low temperature toughness of weld metal was good. The weld metal with higher Ni content solidified completely as austenite, causing dendritic segregation of Mn and Ni.
Keywords:high strength weld metal  microstructure  solidification mode  Ni element
本文献已被 CNKI 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号