首页 | 本学科首页   官方微博 | 高级检索  
     

TC4-DT电子束焊接头显微组织及疲劳裂纹扩展行为
引用本文:唐振云,马英杰,毛智勇,雷家峰,刘羽寅,李晋炜.TC4-DT电子束焊接头显微组织及疲劳裂纹扩展行为[J].焊接学报,2012,33(9):109-112.
作者姓名:唐振云  马英杰  毛智勇  雷家峰  刘羽寅  李晋炜
作者单位:1. 北京工业大学机械工程与应用电子技术学院,北京100124 中航工业北京航空制造工程研究所高能束流加工技术国防重点实验室,北京100024
2. 中国科学院金属研究所,沈阳,110016
3. 中航工业北京航空制造工程研究所高能束流加工技术国防重点实验室,北京,100024
摘    要:在光学显微镜下对TC4-DT钛合金电子束焊接头显微组织进行了分析,讨论了接头不同位置显微组织特征.比较了疲劳裂纹始于焊接接头不同位置时的宏观裂纹扩展路径及裂纹扩展速率,依据焊接接头显微组织特点讨论了显微组织对疲劳裂纹扩展行为的影响.结果表明,电子束焊接头沿熔深方向显微组织存在一定的差异;文中条件下,与母材区相比焊缝熔合区及热影响区具有较高的疲劳裂纹扩展抗力,导致裂纹扩展路径逐步偏向母材区,最后讨论了裂纹扩展路径的偏折对裂纹扩展速率的影响.

关 键 词:TC4-DT  电子束焊  接头显微组织  疲劳裂纹扩展
收稿时间:2011/7/12 0:00:00

Microstructure and fatigue crack growth behavior of electron beam welded joints for TC4-DT titanium alloy
TANG Zhenyun,MA Yingjie,MAO Zhiyong,LEI Jiafeng,LIU Yuyin and LI Jinwei.Microstructure and fatigue crack growth behavior of electron beam welded joints for TC4-DT titanium alloy[J].Transactions of The China Welding Institution,2012,33(9):109-112.
Authors:TANG Zhenyun  MA Yingjie  MAO Zhiyong  LEI Jiafeng  LIU Yuyin and LI Jinwei
Affiliation:1.College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100124,China;2.Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China;3.Key Lab for High Density Beam Manufacture Technology,Beijing Aeronautic Manufacturing Technology Research Institute,Beijing 100024,China)
Abstract:The microstructure of electron beam welded joints of TC4-DT titanium alloy was analyzed by optical microscope, and the microstructure characteristics of different position in the joint were also analyzed.The crack propagation path and its growth rate were investigated on the joint samples, which the initial crack appeared at different location of the welded joints.Based on the microstructure characteristics of the welded joints, the influences of the weld microstructure on fatigue crack growth behavior were discussed.The results show that there are differences in the microstructure for electron beam welded joint along penetration depth.The fatigue crack propagation resistances of the weld fusion zone and heat affected zone were higher than that of the base metal, and the crack propagation path of the joints gradually tended to base metal zone.The influence of the crack propagation path offsets on crack growth rate was finally discussed in the paper.
Keywords:TC4-DT titanium alloy  electron beam welding  weld microstructure  fatigue crack growth
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号