| 盖帽成形工艺及模具设计 |
| |
| 引用本文： | 陈颂如,聂兰启,汪发春.盖帽成形工艺及模具设计[J].金属成形工艺,2010(5):64-67. |
| |
| 作者姓名： | 陈颂如 聂兰启 汪发春 |
| |
| 作者单位： | [1]湖南省长沙机电产品研究开发中心,长沙410100 [2]山东红旗机电有限公司,山东潍坊261031 [3]北京有色金属研究总院,北京100088 |
| |
| 摘 要： | 通过对盖帽零件的拉深工艺进行分析，介绍了模具结构和工作过程，提出模具主要工作部分零件的设计要点，对生产中出现的问题进行了分析，并给出了解决措施。
|
| 关 键 词： | 盖帽 成形 冷镦 |
The Forming Process and Die Design of a Metal Cover |
| |
| CHEN Song-ru,NIE Lan-qi,WANG Fa-chun.The Forming Process and Die Design of a Metal Cover[J].Metal Forming Technology,2010(5):64-67. |
| |
| Authors: | CHEN Song-ru NIE Lan-qi WANG Fa-chun |
| |
| Affiliation: | 1. Changsha Machine ＆ Electron Design Center, Changsha 410100, China; 2. Shandong Hongqi Electromechanical Co. Ltd. , Weifang 261031, China; 3. Beijing General Research Institute For Nonferrous Metals, Beijing 100088, China) |
| |
| Abstract: | Through analyzing the forming process of the metal cover the construction of its die and the die＇s working process are introduced. The main points of the die＇s design are presented. The problems in production are analysed and measures are put forward which insures forming of the metal cover. |
| |
| Keywords: | metal cover drawing cold upsetting |
| 本文献已被 维普 等数据库收录！ |
