| 拖把支架注射模具设计 |
| |
| 引用本文： | 李嗣聃.拖把支架注射模具设计[J].金属成形工艺,2012(1):65-67. |
| |
| 作者姓名： | 李嗣聃 |
| |
| 作者单位： | 重庆五一技师学院,重庆400042 |
| |
| 摘 要： | 在分析拖把支架的结构特点和使用要求的基础上，设计了一套一模两腔的注射模具。实践证明，模具的浇注系统、冷却系统和斜导柱抽芯机构设计合理，动作可靠，塑件质量能满足设计要求。
|
| 关 键 词： | 拖把支架 注射模具 斜导柱抽芯 |
Design of Injection Mould for Mop Holder |
| |
| LI Si-dan.Design of Injection Mould for Mop Holder[J].Metal Forming Technology,2012(1):65-67. |
| |
| Authors: | LI Si-dan |
| |
| Affiliation: | LI Si-dan (Chongqing Wuyi College of Technician, Chongqing 400042, China) |
| |
| Abstract: | Based on the analysis of the structural features and requirements of the mop holder a injection mould with two cavities was designed. Practice has proved that the mould gating system, cooling system and bevel pillar core-pulling mechanism are reasonable in design, reliable in action, the quality of plastic parts meets design requirements. |
| |
| Keywords: | mop holder injection mould bevel pillar core-pulling |
| 本文献已被 维普 等数据库收录！ |
