首页 | 本学科首页   官方微博 | 高级检索  
     

过共晶铝硅自生梯度复合材料的组织与性能
引用本文:李克,王俊,周鸣,张雪萍,孙宝德,周尧和.过共晶铝硅自生梯度复合材料的组织与性能[J].中国有色金属学报,2002,12(3):521-524.
作者姓名:李克  王俊  周鸣  张雪萍  孙宝德  周尧和
作者单位:上海交通大学 材料科学与工程学院,上海 200030
基金项目:国家重点基础研究发展规划资助项目 (G19990 6 490 0 -4 ),国家自然科学基金资助项目 ( 5 98710 2 9)
摘    要:用电磁分离工艺成功制备了初生Si相体积分数、材料显微硬度和耐磨性沿径向呈梯度分布的棒状复合材料 ,讨论了梯度层的形成过程。微观组织观察和力学性能测试结果表明 :在近外壁区域形成了体积分数高达16 %的细小初生Si相偏聚区 ,此区硬度高 ,耐磨性好 ,中心区为细小和均匀的共晶组织 ,两部分之间为颗粒体积分数渐变的过渡区 ,可使耐磨层与基体的结合强度得到保证

关 键 词:电磁分离  过共晶铝硅合金  初生Si相  自生梯度复合材料
文章编号:1004-0609(2002)03-0521-04
修稿时间:2001年6月21日

Microstructure and properties of in-situ hypereutectic Al-Si functional graded materials
LI Ke,WANG Jun,ZHOU Ming,ZHANG Xue-ping,SUN Bao-de,ZHOU Yao-he.Microstructure and properties of in-situ hypereutectic Al-Si functional graded materials[J].The Chinese Journal of Nonferrous Metals,2002,12(3):521-524.
Authors:LI Ke  WANG Jun  ZHOU Ming  ZHANG Xue-ping  SUN Bao-de  ZHOU Yao-he
Abstract:Hypereutectic Al-Si functional graded materials(FGMs) were produced by electromagnetic separating process. It is found that Si primary particles are formed at the outer zone of the cylinder like samples with graded distribution and its volume fraction reaches 16%. Results show that the hardness and wear resistance also exhibit graded distribution along the radial direction.
Keywords:electromagnetic separating  hypereutectic Al-Si alloy  primary Si phase  in-situ FGMs
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号