首页 | 本学科首页   官方微博 | 高级检索  
     

化学成分对原位TiCp/Fe复合材料组织和性能的影响
引用本文:严有为,魏伯康.化学成分对原位TiCp/Fe复合材料组织和性能的影响[J].中国有色金属学报,1999,9(2):225-230.
作者姓名:严有为  魏伯康
作者单位:华中理工大学材料科学与工程学院
基金项目:材料复合新技术国家重点实验室开放课题,华中理工大学科技基金
摘    要:系统地研究了化学成分对原位TiCp/Fe复合材料组织和性能的影响,并确定了该材料的最佳化学成分。结果表明:Ti是影响复合材料组织中TiC颗粒形核率的关键因素,而C主要影响组织中TiC颗粒的尺寸;在合金熔体中,加入一定量的Si有利于TiC颗粒的形成,而Mn主要用来细化珠光体基体。

关 键 词:TiC_p/Fe复合材料  原位反应  化学成分

EFFECT OF CHEMICAL COMPOSITION ON MICROSTRUCTURE AND PROPERTY OF INSITU TiCp/Fe COMPOSITE
Yan Youwei,Wei Bokang,Lin Hantong and Mei Zhi College of Materials Science and Engineering,Huazhong University of Science and Technology,Wuhan ,P. R. China.EFFECT OF CHEMICAL COMPOSITION ON MICROSTRUCTURE AND PROPERTY OF INSITU TiCp/Fe COMPOSITE[J].The Chinese Journal of Nonferrous Metals,1999,9(2):225-230.
Authors:Yan Youwei  Wei Bokang  Lin Hantong and Mei Zhi College of Materials Science and Engineering  Huazhong University of Science and Technology  Wuhan  P R China
Affiliation:Yan Youwei,Wei Bokang,Lin Hantong and Mei Zhi College of Materials Science and Engineering,Huazhong University of Science and Technology,Wuhan 430074,P. R. China
Abstract:The effects of chemical composition on microstructures and mechanical properties of insitu TiCp/Fe composites have been studied systematically, and the optimum chemical composition of this composite has also been determined. The results showed that Ti is the key factor affecting the nucleating rate of TiC particulates, and C mainly affects the sizes of TiC particulates in the composite microstructures. Adding proper Si content to alloy melt is favourable to form TiC particulates, and Mn is mainly used to refine pearlite matrix.
Keywords:TiCp/Fe compositeinsitu reactionchemical compostion
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号