首页 | 本学科首页   官方微博 | 高级检索  
     

液态铝阴极法制备铝钙中间合金
引用本文:王一雍,李继东,金辉,王志英.液态铝阴极法制备铝钙中间合金[J].中国有色金属学报,2011(9).
作者姓名:王一雍  李继东  金辉  王志英
作者单位:辽宁科技大学材料与冶金学院;
基金项目:国家自然科学基金资助项目(50874061); 高等学校博士点专项科研基金资助项目(20102120120001)
摘    要:在CaCl2-CaF2体系中,以CaO为电解原料,采用液态铝阴极法生产铝钙中间合金。采用熔盐电解监控仪测量电解过程中的反电动势、槽电压、电流等工艺参数及电解波形图,通过电位控制法调节CaO的加料周期,同时根据所得合金产品中的钙含量(质量分数)探讨影响电流效率的因素。结果表明:反电动势随电流密度增加而增大,通过控制电位法测得加料周期为30 min;在740℃、电流为7 A的条件下,电解1 h可制取钙含量为11.6%的铝钙合金,电流效率可达67.3%。

关 键 词:铝钙合金  液态铝阴极法  反电动势  电流效率  

Preparation of Al-Ca master alloy by liquid aluminium cathode method
WANG Yi-yong,LI Ji-dong,JIN Hui,WANG Zhi-ying.Preparation of Al-Ca master alloy by liquid aluminium cathode method[J].The Chinese Journal of Nonferrous Metals,2011(9).
Authors:WANG Yi-yong  LI Ji-dong  JIN Hui  WANG Zhi-ying
Affiliation:WANG Yi-yong,LI Ji-dong,JIN Hui,WANG Zhi-ying (School of Materials and Metallurgy,University of Science and Technology Liaoning,Anshan 114051,China)
Abstract:Al-Ca master alloy was prepared by liquid aluminium cathode method,using a mixed molten salt system of CaCl2-CaF2 and feeding CaO as electrolysis material.The technological parameters such as back electromotive force(BEMF),cell voltage,current and electrolysis waveform were measured by testing device of molten salt electrolysis.The feeding period of CaO was adjusted by the method of electric potential control.At the same time,the factor that affects current efficiency was discussed according to the Ca conte...
Keywords:Al-Ca alloy  liquid aluminium cathode method  back electromotive force  current efficiency  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号