| 热浸锌铝合金镀层表面纳米晶腐蚀产物共沉积机理 |
| |
| 引用本文： | 李焰,魏绪钧,冯法伦.热浸锌铝合金镀层表面纳米晶腐蚀产物共沉积机理[J].中国有色金属学报,2001,11(2):248-252. |
| |
| 作者姓名： | 李焰 魏绪钧 冯法伦 |
| |
| 作者单位： | 1. 中国科学院 海洋研究所,
2. 东北大学 材料与冶金学院, |
| |
| 摘 要： | 采用XRD和TEM对热浸锌铝合金镀层在动态充气海水全浸试验时所形成的白色腐蚀产物进行了研究，结果表明：腐蚀产物主要由典型的纳米级Zn4CO3(OH)6.H2O,Zn5(OH)8Cl2和Zn6Al2CO3(OH)16.4H2O微晶组成，而这种纳米晶的形成与由吸附引起的Zn^2 和Al^3 离子的共沉积有关，镀层表面腐蚀后首先生成Al(OH)3凝胶，当凝胶吸附的锌离子超过异相核的临界过饱和度时，发生锌、铝氢氧化物的共沉淀，生成双氢氧化物，由于晶体长大速度较慢不能与沉淀形核同步进行，导致镀层表面形成了微晶状态的腐蚀产物。
|
| 关 键 词： | 锌铝合金镀层 纳米晶 腐蚀产物 共沉积 热浸镀 |
| 文章编号： | 1004-0609(2001)02-0248-05 |
| 修稿时间： | 2000年7月12日 |
Co-precipitation of
nano-crystalline corrosion products on hot dip Zn-Al alloy coating |
| |
| LI Yan,WEI XU-jun,FENG Fa-lun.Co-precipitation of
nano-crystalline corrosion products on hot dip Zn-Al alloy coating[J].The Chinese Journal of Nonferrous Metals,2001,11(2):248-252. |
| |
| Authors: | LI Yan WEI XU-jun FENG Fa-lun |
| |
| Affiliation: | LI Yan 1,WEI Xu jun 2,FENG Fa lun 2 |
| |
| Abstract: | The white corrosion products on hot dip Zn-Al alloy coating exposed to seawater in dynamic aerated immersion were investigated by means of XRD and TEM. The results show that the corrosion products are typical nanometer microcrystals， containing mainly Zn4CO3(OH)6*H2O， Zn5(OH)8Cl2 and Zn6Al2CO3(OH)16*4H2O， and that the formation of the nano-crystalline corrosion products probably is related with the co-precipitation of Zn2+ and Al3+ caused by adsorption. Zn-Al alloy coating seawater attack， Al(OH)3 gel is first produced on the coating surface. Zn and Al hydroxides co-precipitate and form double-hydroxide when the concentration of adsorbed Zn2+ ions by the newly produced gel exceeded the critical supersaturation of the interphase nucleation. However， because the growth of the crystals is too low to keep in step with the nucleation， a layer of nano-crystalline corrosion products are produced on the surface of the coating finally. |
| |
| Keywords: | Zn Al alloy coating nano crystalline corrosion product co precipitation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
