| 小热变形半固态A2017合金的二次加热组织与半固态轧制 |
| |
| 引用本文： | 管仁国,温景林,刘相华,陈彦博.小热变形半固态A2017合金的二次加热组织与半固态轧制[J].中国有色金属学报,2002,12(5):1002-1006. |
| |
| 作者姓名： | 管仁国 温景林 刘相华 陈彦博 |
| |
| 作者单位： | 东北大学材料与冶金学院,沈阳,110004 |
| |
| 基金项目： | 国家重点基础研究发展规划项目 (G2 0 0 0 0 6 72 0 8-4 ) |
| |
| 摘 要： | 对单辊搅拌技术制得的A2017半固态材料小热变形后二次加热时的组织演化进行了研究。小热变形后的半固态材料加热到半固态区后可获得细小的球形组织；在加热过程中，由于位错能与界面能的存在以及溶质的扩散使合金发生块状化、再结晶、熔断球化3阶段变化；小变形促进该过程的进行；由于细小球形组织成形性能好、半固态轧材的断裂强度提高了75MPa，延伸率提高了16％。
|
| 关 键 词： | Al合金 组织 性能 A2017合金 二次加热 断裂强度 半固态轧制 半固态触变成形工艺 |
| 文章编号： | 1004-0609(2002)05-1002-05 |
| 修稿时间： | 2001年11月20 |
Microstructure of remelted A2017 semi-solid alloy with little hot deformation and its semi-solid rolling |
| |
| GUAN Ren-guo,WEN Jing-lin,LIU Xiang-hua,CHEN Yan-bo.Microstructure of remelted A2017 semi-solid alloy with little hot deformation and its semi-solid rolling[J].The Chinese Journal of Nonferrous Metals,2002,12(5):1002-1006. |
| |
| Authors: | GUAN Ren-guo WEN Jing-lin LIU Xiang-hua CHEN Yan-bo |
| |
| Abstract: | By using A2017 semi-solid material manufactured by Single-Roll Stirring(SRS) process, the microstructure evolution during the process of remelted A2017 semisolid alloy with little hot deformation was studied. Finer spherical microstructure was obtained after it was remelted to semi-solid temperature. Due to energies of dislocations and internal surface of microstructure and solute diffusion, A2017 alloy changes its microstructure, which includes three steps during heating process: conglomeration, recrystalization and spherodization. Little deformation accelerates the process described as above. Because of good forming property of spherical structure, the crack strength of products obtained by semi-solid rolling process is improved by 75 MPa, and elongetion is improved by 16%. |
| |
| Keywords: | semi-solid Al base alloy microstructure properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
