首页 | 本学科首页   官方微博 | 高级检索  
     

激光与红外重熔对63Sn37Pb/焊盘界面微观组织的影响
引用本文:田艳红,王春青.激光与红外重熔对63Sn37Pb/焊盘界面微观组织的影响[J].中国有色金属学报,2002,12(3):471-475.
作者姓名:田艳红  王春青
作者单位:哈尔滨工业大学,现代焊接生产技术国家重点实验室,哈尔滨,150001
摘    要:研究了塑料球栅阵列 (PBGA)钎料球激光重熔以及红外二次重熔过程中 6 3Sn37Pb共晶钎料与Au/Ni/Cu焊盘之间界面反应。结果表明 :钎料凸点 /焊盘界面处金属间化合物的形貌和数量与激光输入能量密切相关。随着激光输入能量的增大 ,Au完全溶解到钎料中 ,界面处连续分布的Au Sn化合物层全部转变为针状AuSn4 相 ,部分针状AuSn4 从界面处折断并落入钎料中 ,最后变为细小的颗粒状弥散分布在钎料内部。红外二次重熔后焊点界面处的针状AuSn4 溶解到钎料中 ,钎料组织由原来的粒状结晶结构变为层片状结晶结构 ,焊点界面处出现了不同形态的粗大富Pb相

关 键 词:钎料球  激光重熔  钎料凸点  红外重熔  焊点
文章编号:1004-0609(2002)03-0471-05
修稿时间:2001年6月13日

Effects of laser and infrared secondary reflow on microstructure of 63Sn37Pb/pad interface
TIAN Yan-hong,WANG Chun-qing.Effects of laser and infrared secondary reflow on microstructure of 63Sn37Pb/pad interface[J].The Chinese Journal of Nonferrous Metals,2002,12(3):471-475.
Authors:TIAN Yan-hong  WANG Chun-qing
Abstract:Laser and infrared secondary reflow have obvious effects on the interfacial microstructure of 63Sn37Pb eutectic solder and Au/Ni/Cu pad. The results show that the morphology of intermetallic compounds at interface is strongly influenced by laser input energy. With increase of laser input energy, Au dissolves into the molten solder completely, and continuous Au-Sn intermetallics changes into needle-like AuSn 4 phase. The needle-like AuSn 4 is broken off from the interface and falls into the solder, and disappears from the interface finally. After secondary infrared reflow, needle-like AuSn 4 dissolves into the solder as rod-shape. Microstructure of solder bulk changes from grain shape into lamella shape, and different shapes of Pb-rich islands appear at the interface.
Keywords:solder ball  laser reflow  solder bump  infrared reflow  solder joint
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号