| 利用局部摩擦优化锻压成形的材料流动 |
| |
| 引用本文： | 张立力,戴映荣,曹飞,曾琦.利用局部摩擦优化锻压成形的材料流动[J].锻压技术,2003,28(3):40-43. |
| |
| 作者姓名： | 张立力 戴映荣 曹飞 曾琦 |
| |
| 作者单位： | 北京机电研究所,100083 |
| |
| 基金项目： | 国家自然科学基金资助项目 (59990 4 70 3) |
| |
| 摘 要： | 在锻压成形过程中，摩擦不仅大大提高了模具载荷、变形温度，而且影响了变形过程中的应变分布及材料流动。本文采用塑性成形有限元分析锻压成形过程，提出改变模具局部摩擦的方法以优化工件材料流动和流动速度，避免锻压件的成形缺陷和确保模具中金属充满。将此方法应用于ABS汽车轮毂和曲轴成形过程，验证它的有效性。
|
| 关 键 词： | 数值模拟 局部摩擦 材料流动 汽车 轮毂 曲轴 锻压 |
Optimization of material flow in forging by using local friction |
| |
| Beijing Research Institute of Mechanical & Electrical Technology,Zhang Lili,Dai Yingrong,Cao Fei,Zeng Qi.Optimization of material flow in forging by using local friction[J].Forging & Stamping Technology,2003,28(3):40-43. |
| |
| Authors: | Beijing Research Institute of Mechanical & Electrical Technology Zhang Lili Dai Yingrong Cao Fei Zeng Qi |
| |
| Affiliation: | Beijing Research Institute of Mechanical & Electrical Technology Zhang Lili Dai Yingrong Cao Fei Zeng Qi |
| |
| Abstract: | During the forging process, friction could not only increase the die load and deformation temperature, but also influence the strain distribution and material flow. Based on the study on forging process by FEM, this paper put forward a method to optimize the material flow and flow velocity by changing the local friction of dies, and consequently avoids the forming defects of forging pieces and make sure the material can fill the dies. This method is used in the forming process of hub and crank, and be tested effectiveness. |
| |
| Keywords: | Simulation Local friction Material flow |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
