大型锻压机典型组合结构接触问题的研究

为保证大型锻压机组合结构的整体工作性能,针对锻压机典型的局部组合结构--C型板与十字键联接,运用大型商用有限元软件Marc,分析了锻造过程中巨大工作载荷传递引起的两者之间的接触状态变化规律.研究结果表明:工作载荷作用下,十字键和C型板之间接触面积减小,出现"开缝"和界面接触应力分布极度不均匀的现象,直接影响压机结构承载...

Research on contact problems of typical composite structure for large forging press

On account of the press’s typical structure(C plates and cross key),the commercial finite element software Marc was used to study the contact stress laws which was caused by the huge working load during forging to ensure the nice integrated working performance of large forging press’s composite structure results.The research results indicate that the contact area decreases,the slit appears,and the distribution of contact stress is extremely non-uniform between C plates and cross key,which directly affects the transmission characteristics of force flow during the process of loading.The reasonable interference fit is set to improve or eliminate the phenomenon.The interference fit makes the maximum downrange of slit reach to 77.87% under the premise of meeting strength design,improves the extremely non-uniform contact stress,the maximum stress difference changes from 156.42 MPa to 131.59 MPa,and the increase of contact area leads to the transmission of force flow uniformly.