首页 | 本学科首页   官方微博 | 高级检索  
     

添加Si对A_2B_7型电极合金结构及电化学贮氢性能的影响(英文)
引用本文:张羊换,任慧平,蔡颖,杨泰,张国芳,赵栋梁.添加Si对A_2B_7型电极合金结构及电化学贮氢性能的影响(英文)[J].中国有色金属学会会刊,2014,24(2):406-414.
作者姓名:张羊换  任慧平  蔡颖  杨泰  张国芳  赵栋梁
作者单位:[1]内蒙古科技大学内蒙古自治区白云鄂博矿多金属资源综合利用重点实验室,包头014010 [2]钢铁研究总院功能材料研究所,北京100081
基金项目:Projects (50961009,51161015) supported by the National Natural Science Foundation of China,Project (2011AA03A408) supported by the High-tech Research and Development Program of China,Projects (2011ZD10,2010ZD05) supported by the Natural Science Foundation of Inner Mongolia, China
摘    要:为改善La–Mg–Ni系A2B7型合金的电化学贮氢性能,在合金中添加一定量的Si元素,通过真空熔炼及退火处理的方法制备La0.8Mg0.2Ni3.3Co0.2Six(x=0-0.2)电极合金。研究Si元素的添加对合金结构及电化学贮氢性能的影响。结果表明,铸态及退火态合金均为多相结构,分别为Ce2Ni7型的(La,Mg)2Ni7相和CaCu5型的LaNi5相以及少量的残余相LaNi3。Si元素的添加没有改变合金的主相,但使得合金中的(La,Mg)2Ni7相减少而LaNi5相增加。添加Si显著地影响了合金的电化学性能。随着Si含量的增加,铸态及退火态合金的放电容量逐步降低,但循环稳定性却随着Si含量的增加而增强。此外,合金电极的高倍率放电性能、极限电流密度、氢扩散系数以及电化学交流阻抗谱的测试均表明合金的电化学动力学性能随着Si含量的增加先增加而后减小。

关 键 词:AB型电极合金  添加Si  结构  电化学性能
收稿时间:4 January 2013

Structures and electrochemical hydrogen storage performance of Si added A2B7-type alloy electrodes
Yang-huan ZHANG,Hui-ping REN,Ying CAI,Tai YANG,Guo-fang ZHANG,Dong-liang ZHAO.Structures and electrochemical hydrogen storage performance of Si added A2B7-type alloy electrodes[J].Transactions of Nonferrous Metals Society of China,2014,24(2):406-414.
Authors:Yang-huan ZHANG  Hui-ping REN  Ying CAI  Tai YANG  Guo-fang ZHANG  Dong-liang ZHAO
Affiliation:1. Key Laboratory of Integrated Exploitation of Baiyun Obo Multi-Metal Resources, Inner Mongolia University of Science and Technology, Baotou 014010, China; 2. Department of Functional Material Research, General Iron and Steel Research Institute, Beijing 100081, China)
Abstract:In order to ameliorate the electrochemical hydrogen storage performance of La-Mg-Ni system A2B7-type electrode alloys, a small amount of Si was added. The La0.8Mg0.2Ni3.3Co0.2Six (x=0-0.2) electrode alloys were prepared by casting and annealing. The effects of adding Si on the structure and electrochemical hydrogen storage characteristics of the alloys were investigated systematically. The results indicate that the as-cast and annealed alloys hold multiple structures, involving two major phases of (La, Mg)2Ni7 with a Ce2Ni7-type hexagonal structure and LaNi5 with a CaCu5-type hexagonal structure as well as one residual phase LaNi3. The addition of Si results in a decrease in (La, Mg)2Ni7 phase and an increase in LaNi5 phase without changing the phase structure of the alloys. What is more, it brings on an obvious effect on electrochemical hydrogen storage characteristics of the alloys. The discharge capacities of the as-cast and annealed alloys decline with the increase of Si content, but their cycle stabilities clearly grow under the same condition. Furthermore, the measurements of the high rate discharge ability, the limiting current density, hydrogen diffusion coefficient as well as electrochemical impedance spectra all indicate that the electrochemical kinetic properties of the electrode alloys first increase and then decrease with the rising of Si content.
Keywords:A2B7-type electrode alloy  Si additive  structure  electrochemical characteristics
本文献已被 CNKI 维普 ScienceDirect 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号