首页 | 本学科首页   官方微博 | 高级检索  
     

珩磨工具用中温钎焊材料的研制
引用本文:杨继东,裴夤崟,龙伟民,钟素娟.珩磨工具用中温钎焊材料的研制[J].金刚石与磨料磨具工程,2011,31(5):88-90.
作者姓名:杨继东  裴夤崟  龙伟民  钟素娟
作者单位:郑州机械研究所新型钎焊材料与技术国家重点实验室,郑州,450001
摘    要:针对目前珩磨条钎焊存在的问题,采用中温钎焊对珩磨工具进行了连接试验,对中温钎焊用钎料的化学成分进行了调整,测试了钎料的熔化温度、钎料对珩磨条的润湿性以及钎焊接头的抗拉强度,并比较了不同钎料钎焊后珩磨工具的变形量.研究表明:中温钎焊工艺变形小,强度较高,是珩磨条连接的可行方式.

关 键 词:珩磨条  中温钎焊  钎焊强度  变形量

Development of moderate temperature brazing filler metals for honing tools
Yang Jidong,Pei Yinyin,Long Weimin,Zhong Sujuan.Development of moderate temperature brazing filler metals for honing tools[J].Diamond & Abrasives Engineering,2011,31(5):88-90.
Authors:Yang Jidong  Pei Yinyin  Long Weimin  Zhong Sujuan
Affiliation:Yang Jidong Pei Yinyin Long Weimin Zhong Sujuan(State Key laboratory of Advanced Brazing Filler Metals and Technology,Zhengzhou Research Institute of Mechanical Engineering,Zhengzhou 450001,China)
Abstract:For the present brazing problems on the honing segments,joining experiment on the honing segments was conducted by moderate temperature brazing.The compositions of moderate temperature brazing filler metals were adjusted,melting temperature of filler metals,wettability of filler metals on the honing segments and the tensile strength of brazing joints were tested.The deformation amount of brazed honing segments with different filler metals was compared.The research results showed that the moderate temperatur...
Keywords:honing segment  moderate temperature brazing  brazing strength  deformation  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号