| 基于有限元方法的动平衡机的设计 |
| |
| 引用本文： | 高阵雨,武二永,杨世锡.基于有限元方法的动平衡机的设计[J].组合机床与自动化加工技术,2007(9):5-8,11. |
| |
| 作者姓名： | 高阵雨 武二永 杨世锡 |
| |
| 作者单位： | 1. 浙江大学,机械与能源工程学院,杭州,310027
2. 浙江大学,信息学院,杭州,310027 |
| |
| 摘 要： | 首先基于有限元建立了转子的动力学模型,然后给出了动平衡机硬支承的设计方法,同时利用有限元方法计算得出了系统的固有频率和各机构间的阻尼系数;然后分析了现有标定方法的特点,提出了优化的标定方法,该方法优于现有标定方法;最后根据处理后振动信号的特点,结合已有数字信号处理算法,提出一种更精确不平衡量提取方法,以提高动平衡机的灵敏度和精度。实验证明,该系统具有高效、高精和稳定的特点。
|
| 关 键 词： | 动平衡 有限元 标定 不平衡量提取 |
| 文章编号： | 1001-2265（2007）09-0005-04 |
| 修稿时间： | 2007-06-15 |
The Design of Dynamic Balancing Machine Based on Finite Element Analysis |
| |
| GAO Zhen-yu,WU Er-yong,YANG Shi-xi.The Design of Dynamic Balancing Machine Based on Finite Element Analysis[J].Modular Machine Tool & Automatic Manufacturing Technique,2007(9):5-8,11. |
| |
| Authors: | GAO Zhen-yu WU Er-yong YANG Shi-xi |
| |
| Affiliation: | 1. College of Mechanical and Energy Engineering; 2. College of info Science and Enigneering, Zhengjiang University, Hangzhou 310027, China |
| |
| Abstract: | Firstly the dynamics model of rotor is set up,then the design methods of rigid bearing for dynamic balancing machine is presented,meanwhile the natural frequency of system and damping coefficient between different part of the machine is calculated out;Secondly,after analyzing the disadvantages of existing methods,a optimized calibrating method is advanced;Finally,based on the characteristics of vibrating signals,combined with existing digital signal processing algorithms,a more accurate unbalancing elements extracting algorithm is discussed for enhancing the precision and sensitivity of the machine.Experiments results show that our system is feasible,effective and stability. |
| |
| Keywords: | dynamic balancing finite element analysis calibrating unbalancing element extracting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
