| 刀具磨损的测量与自动补偿 |
| |
| 引用本文： | 高永全,王凡.刀具磨损的测量与自动补偿[J].组合机床与自动化加工技术,2006(12):82-83. |
| |
| 作者姓名： | 高永全 王凡 |
| |
| 作者单位： | 1. 中北大学,物理系,太原,030051
2. 中北大学,工业设计系,太原,030051 |
| |
| 摘 要： | 论文主要介绍了利用CCD测量被加工工件尺寸的工作原理以及压电传感器逆压电效应的工作原理。阐述了CCD测量工件直径的理论、方法和压电传感器组的结构和工作过程。详细论述了该测量控制系统是如何进行实时、动态和自动监控、测量被加工工件的尺寸变化；以及系统是如何根据工件尺寸的变化来判断刀具的磨损情况，根据测量结果来自动发出刀具过度磨损信号，并自动驱动系统控制压电传感器根据磨损情况来确定刀具的补偿量，从而完成对刀具磨损的自动补偿。
|
| 关 键 词： | 逆压电效应 磨损补偿 |
| 文章编号： | 1001-2265(2006)12-0082-02 |
| 收稿时间： | 2006-05-22 |
| 修稿时间： | 2006-07-19 |
Automatic Compensation of Cutting Tool Abrasion |
| |
| GAO Yong-quan,WANG Fan.Automatic Compensation of Cutting Tool Abrasion[J].Modular Machine Tool & Automatic Manufacturing Technique,2006(12):82-83. |
| |
| Authors: | GAO Yong-quan WANG Fan |
| |
| Affiliation: | a. Department of Physics; b. Department of Mechanical Engineering, North University of China, Taiyuan 030051, China |
| |
| Abstract: | It aims to present mainly how principle to measure the size of work processed using CCD and the operating principle of piezoelectricity sensor.And to state how the measure and control system to dynamically monitor timely the size change of work processed,at the same time to diagnose the condition of cutting tool'abrasion.Further to decide atonement of cutting tool according to the abrasion condition,and to operate system to finish automatic compensation. |
| |
| Keywords: | CCD |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
