| 旋转弯管注射模设计 |
| |
| 引用本文： | 肖峰,王冲.旋转弯管注射模设计[J].模具工业,2010,36(10):56-58. |
| |
| 作者姓名： | 肖峰 王冲 |
| |
| 作者单位： | 1. 永高股份有限公司,浙江,台州,318020
2. 桂林电器科学研究院,广西,桂林,541004 |
| |
| 摘 要： | 分析了90°旋转弯管成型工艺特点,优化设计了模具结构、二次滑块抽芯机构,并详细介绍了模具工作过程。模具结构简单、安全,完全满足塑件质量要求。
|
| 关 键 词： | 90°旋转弯管 注射模 二次滑块抽芯机构 |
Design of injection mould for 90 degrees rotational bent pipe |
| |
| XIAO Feng,WANG Chong.Design of injection mould for 90 degrees rotational bent pipe[J].Die & Mould Industry,2010,36(10):56-58. |
| |
| Authors: | XIAO Feng WANG Chong |
| |
| Affiliation: | 1. YONGGAO Co., Ltd, Taizhou, Zhejiang 318020, China;2.Guilin Electrical Equipment Scientific Research Institute, Guilin, Guangxi 541004, China) |
| |
| Abstract: | Analysis on the forming characteristic of a 90 degrees rotational bent pipe helps to optimize the design of an injection mould structure and its twice core-pulling mechanism by slide block. The molding process was discussed in detail. |
| |
| Keywords: | 90 degrees rotational bent pipe injection mould twice core-pulling by slide block |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
