| 斜滑块顺序抽芯延迟顶出注射模设计 |
| |
| 引用本文： | 李建华,潘翠明.斜滑块顺序抽芯延迟顶出注射模设计[J].模具工业,2007,33(11):39-42. |
| |
| 作者姓名： | 李建华 潘翠明 |
| |
| 作者单位： | 南京林业大学,机械电子工程学院,江苏,南京,210037 |
| |
| 摘 要： | 根据塑件的结构特点,设计了1副多向侧抽芯注射模,模具采用斜滑块侧抽芯装置,实现了多向及L形顺序侧抽芯功能,利用开合模运动完成了各向抽芯、延迟顶出、锁紧及侧型芯复位等动作,简化了模具结构,降低了成本。
|
| 关 键 词： | 注射模 顺序抽芯 斜滑块 延迟顶出 |
| 文章编号： | 1001-2168（2007）11-0039-04 |
| 修稿时间： | 2007-06-26 |
Development of injection mould with angled slide block for sequential core-pulling and delayed ejection |
| |
| LI Jian-hua,PAN Cui-ming.Development of injection mould with angled slide block for sequential core-pulling and delayed ejection[J].Die & Mould Industry,2007,33(11):39-42. |
| |
| Authors: | LI Jian-hua PAN Cui-ming |
| |
| Affiliation: | College of Electronic and Mechanical Engineering, Nanjing Forestry University, Nanjing, Jiangsu 210037, China |
| |
| Abstract: | An injection mould with a multi-directional side core-pulling structure was developed according to the structural feature of the plastic part.The multi-directional L-shaped sequential side core-pulling function was implemented by an angled slide block side core-pulling mechanism.And with the opening and closing of the mould,various operations such as the core-pulling at each direction,the delayed ejection,the locking and resetting of side cores were completed.Thus the mould structure was simplified and the cost was lowered. |
| |
| Keywords: | injection mould sequential core-pulling angled slide block delayed ejection |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
