| 薄壁塑件成型工艺参数优化 |
| |
| 引用本文： | 郑升伟,金杰.薄壁塑件成型工艺参数优化[J].模具工业,2010,36(5):12-15. |
| |
| 作者姓名： | 郑升伟 金杰 |
| |
| 作者单位： | 浙江工业大学,机械工程学院,浙江,杭州,310014 |
| |
| 摘 要： | 利用Moldflow软件对薄壁塑件产生翘曲的原因进行分析,采用正交试验设计方法对塑件成型的注射时间、熔体温度、保压压力、保压时间、冷却时间等工艺参数进行模拟分析,研究各工艺参数对塑件翘曲的影响,从而获得最优工艺参数组合,指导生产。
|
| 关 键 词： | 薄壁塑件 翘曲 正交试验 工艺参数 |
Optimization of injection molding parameters of thin walled plastic part |
| |
| ZHENG Sheng-wei,JIN Jie.Optimization of injection molding parameters of thin walled plastic part[J].Die & Mould Industry,2010,36(5):12-15. |
| |
| Authors: | ZHENG Sheng-wei JIN Jie |
| |
| Affiliation: | ZHENG Sheng-wei,JIN Jie(College of Mechanical Engineering,Zhejiang University of Technology,Hangzhou,Zhejiang 310014,China) |
| |
| Abstract: | An analysis based on Moldflow was made on the cause of warping of a thin walled plastic part and through orthogonal experiments,the technological parameters like injection time,melt temperature,packing pressure,holding time and cooling time,etc.were simulated,in which way,the effect of the parameter variables on the warpage of the product was studied and an optimal combination of the parameters was obtained and then validated through simulation. |
| |
| Keywords: | thin walled plastic part warping orthogonal experiment technological parameter |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
