| 台阶内花键套筒冷挤压工艺研究 |
| |
| 引用本文： | 张水忠,徐新成,廖秋慧.台阶内花键套筒冷挤压工艺研究[J].模具工业,2003(10):22-25. |
| |
| 作者姓名： | 张水忠 徐新成 廖秋慧 |
| |
| 作者单位： | 上海工程技术大学,上海,200336 |
| |
| 摘 要： | 分析了台阶内花键套筒的冷挤压工艺 ,制定出冷挤压件图 ,确定了挤压方案及工艺流程 ,对各工序变形程度进行了校核 ,并计算出了挤压力,同时对挤压模具的设计制造进行了简单的介绍。
|
| 关 键 词： | 冷挤压 台阶内花键 套筒 模具 |
| 文章编号： | 1001-2168(2003)10-0022-04 |
| 修稿时间： | 2003年3月19日 |
Analysis of the Cold Extrusion Technology for the Sleeves of the Inner Spline with Stairs |
| |
| ZHANG Shui-zhong,XU Xin-cheng,LIAO Qiu-hui,.Analysis of the Cold Extrusion Technology for the Sleeves of the Inner Spline with Stairs[J].Die & Mould Industry,2003(10):22-25. |
| |
| Authors: | ZHANG Shui-zhong XU Xin-cheng LIAO Qiu-hui |
| |
| Abstract: | The technology of cold extrusion of the sleeves of the inner spline with stairs was analyzed. The drawing of the workpiece for extrusion was worked out, the extrusionmethod and technological flow formulated, the degree of deformation on each processing step checked, and the extrusion forces calculated. The design and manufacture of the extruding die was briefly introduced. |
| |
| Keywords: | cold extrusion inner spline with stairs sleeve die |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
