| 右内筒支撑板多工位级进模设计 |
| |
| 引用本文： | 刘占军,王冲,谭平宇.右内筒支撑板多工位级进模设计[J].模具工业,2006,32(10):20-23. |
| |
| 作者姓名： | 刘占军 王冲 谭平宇 |
| |
| 作者单位： | 1. 沈阳航空工业学院,辽宁,沈阳,110034
2. 桂林电器科学研究所,广西,桂林,541004 |
| |
| 摘 要： | 分析了右内筒支撑板的冲压工艺性,介绍了其级进模总体设计结构和排样方案。实践证明:模具结构清晰、可靠,能保证产品质量,对此类零件的级进模设计有一定的参考价值。
|
| 关 键 词： | 右内筒支撑板 级进模 排样设计 |
| 文章编号： | 1001-2168(2006)10-0020-04 |
| 收稿时间： | 04 14 2006 12:00AM |
| 修稿时间： | 2006年4月14日 |
Layout of multi-position progressive die for right inside-canister supporting board parts |
| |
| LIU Zhan-jun,WANG Chong,TAN Ping-yu.Layout of multi-position progressive die for right inside-canister supporting board parts[J].Die & Mould Industry,2006,32(10):20-23. |
| |
| Authors: | LIU Zhan-jun WANG Chong TAN Ping-yu |
| |
| Affiliation: | 1. Shenyang Institute of Aeronautical Engineering, Shenyang, Haoning 110034, China; 2. Guilin Electric Equipment Scientific Research Institute, Guilin, Guangxi 541004, China |
| |
| Abstract: | The stamping technology of right side internal cylinder shoe plate part was analyzed. The structural design of progressive die and the layout design were introduced. The die operated reliably and could ensure product quality. |
| |
| Keywords: | right side internal cylinder shoe plate part progressive die layout design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
