| 水室注射模设计 |
| |
| 引用本文： | 林海雄,康俊远,杜汉祥.水室注射模设计[J].模具工业,2010,36(12):47-50. |
| |
| 作者姓名： | 林海雄 康俊远 杜汉祥 |
| |
| 作者单位： | 广东轻工职业技术学院,广东广州510300 |
| |
| 摘 要： | 分析了水室的结构和注射成型存在的工艺问题,选择了成型工艺参数,确定了注射模结构为1模2腔。在模具中设计了细长侧抽芯脱模机构、顺序动作侧抽芯机构、推出机构。结果表明:顺序脱模侧抽芯机构可解决水室塑件凸起部分形成倒钩的脱模问题。
|
| 关 键 词： | 浇注系统 脱模机构 推出机构 |
Design and analysis of injection mould for water tank |
| |
| LIN Hai-xiong,KANG Jun-yuan,DU Han-xiang.Design and analysis of injection mould for water tank[J].Die & Mould Industry,2010,36(12):47-50. |
| |
| Authors: | LIN Hai-xiong KANG Jun-yuan DU Han-xiang |
| |
| Affiliation: | (Guangdong Industry Technical College,Guangzhou,Guangdong 510300,China) |
| |
| Abstract: | The structure of a water tank and the injection molding process were analyzed and the forming parameters were selected.A 2-cavity injection mould was developed,which is characterized by lateral slim core-pulling mechanism for demolding,sequential lateral core-pulling mechanism and stripping mechanism.The results show that the mould structure can help strip the barbed end of the plastic part effectively. |
| |
| Keywords: | feed system demolding mechanism stripping mechanism |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
