| 工具箱塑料盖大型注射模设计 |
| |
| 引用本文： | 张维合.工具箱塑料盖大型注射模设计[J].模具工业,2012,38(9):45-49. |
| |
| 作者姓名： | 张维合 |
| |
| 作者单位： | 广东科技学院,广东东莞,523083 |
| |
| 摘 要： | 介绍了某工具箱塑料盖注射模设计,模具采用定模斜推杆进行内侧抽芯,型腔内空气从排气杆周边的间隙排出,斜推杆和推杆均采用橡胶复位机构复位,模具冷却系统设计合理,导向定位系统工作可靠,成型的塑件由推块和推杆联合推出,模具工作稳定,生产的塑件质量良好。
|
| 关 键 词： | 工具箱塑料盖 注射模 定模斜推杆 推块 排气杆 |
Large injection mould for plastic toolbox cover |
| |
| ZHANG Wei-he.Large injection mould for plastic toolbox cover[J].Die & Mould Industry,2012,38(9):45-49. |
| |
| Authors: | ZHANG Wei-he |
| |
| Affiliation: | ZHANG Wei-he (Guangdong University of Science ＆ Technology, Dongguan, Guangdong 523083, China) |
| |
| Abstract: | An injection mould for a plastic toolbox cover was developed in which slanted ejector pins at fixed half was used for the inside core-pulling, gaps around the push rods for exhausting the air in cavity and rubber for the advance resetting of slanted and normal ejector pins. The molded products were jointly stripped by the ejector pads and pins. |
| |
| Keywords: | plastic toolbox cover injection mould slanted ejector pin at fixed haft ejectorpad exhaust rod |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
