| CAE在电源盒上盖注射模设计中的优化应用 |
| |
| 引用本文： | 王锦红,李海林,钟燕锋.CAE在电源盒上盖注射模设计中的优化应用[J].模具工业,2009,35(11):13-16. |
| |
| 作者姓名： | 王锦红 李海林 钟燕锋 |
| |
| 作者单位： | 1. 广东岭南职业技术学院现代制造学院,广东,广州,510663
2. 广州市今明科技有限公司,广东,广州,510663 |
| |
| 摘 要： | 对一电源盒上盖注射成型进行充模流动和冷却分析,根据分析结果对电源盒上盖注射模的浇注系统和冷却系统进行优化设计,同时验证在合适的注射压力、注射时间、保压压力、保压时间、冷却时间等工艺条件下注射出合格塑件,满足质量要求。
|
| 关 键 词： | 电源盒上盖 数值模拟 浇注系统 冷却系统 |
Application of CAE technology in optimization design of injection mould for the upper cover of power supply box |
| |
| WANG Jin-hong,LI Hai-lin,ZHONG Yan-feng.Application of CAE technology in optimization design of injection mould for the upper cover of power supply box[J].Die & Mould Industry,2009,35(11):13-16. |
| |
| Authors: | WANG Jin-hong LI Hai-lin ZHONG Yan-feng |
| |
| Affiliation: | WANG Jin-hong, LI Hai-lin, ZHONG Yan-feng (1. School of Modem Manufacturing, Guangdong Lingnan Institute of Technology, Guangzhou, Guangdong 510663, China; 2. Guangzhou Jinming Technology Co., Ltd, Guangzhou, Guangdong 510663, China) |
| |
| Abstract: | The feeding and cooling system of an injection mould for the upper cover of a power supply box was optimized based on analysis on the filling flow and cooling process. The qualified products can be obtained with proper parameters as follows： 75 MPa of injection pressure, is of injection time, 65 MPa of packing pressure, and 10 s of cooling time, etc. |
| |
| Keywords: | upper cover of power supply box numerical simulation feeding system cooling system |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
