| 优化预脱氧工艺 降低工艺成本 |
| |
| 引用本文： | 陆长河,吴虎男,杨云志.优化预脱氧工艺 降低工艺成本[J].大型铸锻件,2006(2):29-31. |
| |
| 作者姓名： | 陆长河 吴虎男 杨云志 |
| |
| 作者单位： | 东北特钢集团北满技术中心,161041 |
| |
| 摘 要： | 对超高功率电弧炉生产轴承钢的预脱氧工艺过程进行研究,结果表明:出钢过程中改变合金化顺序,用碳粉平衡掉粗炼钢水中的大部分氧,降低脱氧剂铝的用量,完全可以冶炼出低氧含量的轴承钢。
|
| 关 键 词： | 轴承钢 预脱氧工艺 工艺成本 |
| 修稿时间： | 2006年2月13日 |
Optimizing the Pre-deoxidation Process and Reduce Process Cost |
| |
| Lu Changhe,Wu Hunan,Yang Yunzhi.Optimizing the Pre-deoxidation Process and Reduce Process Cost[J].Heavy Casting and Forging,2006(2):29-31. |
| |
| Authors: | Lu Changhe Wu Hunan Yang Yunzhi |
| |
| Abstract: | The pre-dexidation process for manufacturing the bearing steel with super high power electric arc furnace has been researched in this article.The results shows by changing the alloy sequence during the tapping process,balancing the oxygen in the rough melted liquid steel with carbon powder,the amount of the aluminum can be reduced,but the bearing steel with low oxygen content can be melted as well. |
| |
| Keywords: | bearing steel pre-dexidation process process cost |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
