首页 | 本学科首页   官方微博 | 高级检索  
     

FeO薄膜担载的Pt纳米粒子
引用本文:马腾,王亚琴.FeO薄膜担载的Pt纳米粒子[J].贵金属,2014,35(4):6-12.
作者姓名:马腾  王亚琴
作者单位:1. 沈阳农业大学 理学院,沈阳,110866
2. 沈阳理工大学 环境与化工学院,沈阳,110159
摘    要:研究了FeO/Pt(111)体系中FeO薄膜及其担载的Pt纳米粒子的制备和热稳定性。在Pt(111)表面制备出完整的单层FeO薄膜,并作为载体制备2~3 nm粒径均一且分散均匀的纳米Pt粒子,形成 Pt/FeO/Pt(111)模型催化剂。氧气气氛(1.1×10-6 mbar)以及不同温度的退火处理并不能有效地促进Pt粒子在FeO薄膜表面的分散,也不利于形成全同有恅的Pt纳米粒子阵列。单层FeO表面担载的Pt纳米粒子已能够符合相关模型催化剂研究工作的总要,将成为下一步的工作基础。

关 键 词:金属材料  FeO薄膜  Pt纳米粒子  模型催化剂
收稿时间:2013/9/2 0:00:00

Pt Nanoparticles Supported on FeO Thin Film
MA Teng and WANG Yaqin.Pt Nanoparticles Supported on FeO Thin Film[J].Precious Metals,2014,35(4):6-12.
Authors:MA Teng and WANG Yaqin
Affiliation:College of Science, Shenyang Agricultural University, Shenyang 110866, China;School of Environmental and Chemical Engineering, Shenyang Ligong University, Shenyang 110159, China
Abstract:FeO film and supported Pt nanopartilces were prepared and their thermo-stability was also investigated in the present studies. The preparative process consisted of two steps. The atomic monolayer of FeO film was firstly grown on Pt(111) crystal surface, and then Pt nanoparticles was deposited on the FeO film in variant settings. The Pt nanoparticles supported on FeO were around 2~3 nanometer in size and dispersed evenly on the surface, forming a Pt/FeO/Pt(111) model catalyst. Treatment in 1.1×10-6 mbar O2 and at different annealing temperatures could not promote the dispersion of Pt nanoparticles on FeO film effectively or did not facilitate the formation of arrays of uniform nanoparticles. The Pt nanoparticles supported on FeO thin film display potential application as a novel platinum-based catalyst.
Keywords:metallic material  FeO film  Pt nanoparticle  model catalyst
本文献已被 万方数据 等数据库收录!
点击此处可从《贵金属》浏览原始摘要信息
点击此处可从《贵金属》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号