| 6082铝合金MIG焊焊接接头组织与力学性能研究 |
| |
| 引用本文： | 许鸿吉,唐海鹰,刘志平,谢明,焦建强.6082铝合金MIG焊焊接接头组织与力学性能研究[J].热加工工艺,2010,39(1). |
| |
| 作者姓名： | 许鸿吉 唐海鹰 刘志平 谢明 焦建强 |
| |
| 作者单位： | 1. 大连交通大学,材料科学与工程学院,辽宁,大连,116028
2. 唐山轨道客车有限责任公司,河北,唐山,063035 |
| |
| 摘 要： | 通过拉伸、弯曲、硬度试验以及金相分析等对6082铝合金MIG焊接头的力学性能与显微组织进行了研究。结果表明:采用5087焊丝焊接6082铝合金时,具有较好的抗拉性能,板厚8和4mm的焊接接头焊态的抗拉强度分别为母材的77.8%和73%;弯曲断裂集中在熔合线处,弯曲角度均较小;6082铝合金MIG焊接头焊缝中心组织为等轴晶,靠熔合线的焊缝晶粒沿散热方向呈柱状晶,熔合区晶粒粗大;软化区出现过时效效应,使Mg2Si长大,成为接头最薄弱的区域。
|
| 关 键 词： | 6082铝合金 焊接接头 组织 力学性能 |
Microstructure and Mechanical Properties of 6082 Aluminum Alloy Joints Welded by MIG |
| |
| XU Hongji,TANG Haiying,LIU Zhiping,XIE Ming,JIAO Jianqiang.Microstructure and Mechanical Properties of 6082 Aluminum Alloy Joints Welded by MIG[J].Hot Working Technology,2010,39(1). |
| |
| Authors: | XU Hongji TANG Haiying LIU Zhiping XIE Ming JIAO Jianqiang |
| |
| Affiliation: | XU Hongji1,TANG Haiying1,LIU Zhiping2,XIE Ming1,JIAO Jianqiang1(1.School of Material Science , Engineering,Dalian Jiaotong University,Dalian 116028,China,2.Tangshan Railway Vehicles Co.,Ltd.,Tangshan 063035,China) |
| |
| Abstract: | Microstructure and properties of 6082 aluminum alloy weld joint were investigated by roomtemperature tensile,bending,hardness test and metallographic analysis.The results show that the joints of 6082 aluminum alloy welded with wire 5087 by means of MIG has good tensile strength.The tensile strength of the joint with thickness 8 mm and 4 mm are 77.8% and 73% respectively.The bending failure concentrates in HAZ and bend angle is small.The microstructure of the welded seam center is equiaxed grain and the weld... |
| |
| Keywords: | 6082 aluminum alloys welded joint microstructure mechanical properties |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
