首页 | 本学科首页   官方微博 | 高级检索  
     

汽车铝合金转向节臂锻造成形过程的数值模拟和实验研究
引用本文:周杰,王泽文,徐戊矫.汽车铝合金转向节臂锻造成形过程的数值模拟和实验研究[J].热加工工艺,2010,39(3).
作者姓名:周杰  王泽文  徐戊矫
作者单位:重庆大学材料科学与工程学院,重庆,400044
基金项目:国家科技部技术创新项目 
摘    要:针对汽车铝合金转向节臂的外形特点,结合实际的制造能力,利用DEFORM-3D软件分析了试制过程中产生缺陷的原因.通过数值模拟提出了合理的自由锻制坯形状,弯曲模具和终锻模具结构的设计.将模拟结果用于实际生产并取得成功.

关 键 词:铝合金  弯曲成形  飞边体积  模具结构

Simulation and Experimental Study on Forming Process of Aluminum Alloy Knuckle Arm
ZHOU Jie,WANG Zewen,XU Wujiao.Simulation and Experimental Study on Forming Process of Aluminum Alloy Knuckle Arm[J].Hot Working Technology,2010,39(3).
Authors:ZHOU Jie  WANG Zewen  XU Wujiao
Abstract:According to the shape characteristics of car's aluminum alloy knuckle arm and actual production capacity,a process scheme was proposed.Based on a series of simulation,the causation of disadvantage in the trial manufacture process was analyzed.According to numerical analysis,the proper blank shape,the design of bend die and finished die structurewere designed.The simulation results get test verification.
Keywords:aluminum alloy  bend forming  flash volume  die structure
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号