|
|||||
|
|
| 挤压比对AZ80镁合金组织及性能的影响 | |
| 引用本文： | 张利军,张宝红,张治民,王静.挤压比对AZ80镁合金组织及性能的影响[J].热加工工艺,2010,39(8). |
| 作者姓名： | 张利军 张宝红 张治民 王静 |
| 作者单位： | 1. 中北大学,材料科学与工程学院,山西,太原,030051 2. 山西省集成精密成形工程中心,山西,太原,030051 3. 昆明理工大学,云南,昆明,650224 |
| 基金项目： | 国家自然科学基金，山西省青年科学基金资助项目 |
| 摘 要： | 在温度为390℃时,对AZ80镁合金在工业用压力机上采用15、30、45、60和75五个挤压比进行正挤压,并对不同挤压试样进行研究分析.结果表明:随挤压比的增加,即变形量的增加,在变形过程中新晶粒所占体积分数越来越大,且在一定条件下动态再结晶可以重复进行,因此使晶粒得到明显细化,有效提高了合金综合性能.随挤压比升高,强度有升高趋势,其抗拉强度在挤压比为60时达390MPa,伸长率达11%. |
| 关 键 词： | AZ80镁合金 正挤压 力学性能 |
Influences of Extrusion Ratio on Microstructure and Properties of AZ80 Magnesium Alloy |
|
| ZHANG Lijun,ZHANG Baohong,ZHANG Zhimin,WANG Jing.Influences of Extrusion Ratio on Microstructure and Properties of AZ80 Magnesium Alloy[J].Hot Working Technology,2010,39(8). | |
| Authors: | ZHANG Lijun ZHANG Baohong ZHANG Zhimin WANG Jing |
| Affiliation: | ZHANG Lijun1,ZHANG Baohong2,ZHANG Zhimin2,WANG Jing3 (1. College of Material Science , Engineering,North University of China,Taiyuan 030051,China,2. Engineering Technology Research Center of Integrated Precision Forming of Shanxi Province,3. Kunming University of Science , Technology,Kunming 650024,China) |
| Abstract: | At 390 ℃,AZ80 magnesium alloy was extruded on the industrial machine.five extrusion ratioes(15,30,45,60,70)were adopted,and different extrusion samples were studied.The results show that,with the increase of extrusion ratio,that is,the increase of deformation,the volume fraction of new grains is growing gradually during deformation,and under certain conditions,dynamic recrystallization can be repeated,thus the grain is significantly refined,which effectively improves the mechanical property of the alloy.With the increase of extrusion ratio,the strength tends to increase.When extrusion ratio is 60,the tensile strength reaches 390 MPa,the elongation is 11%. |
| Keywords: | AZ80 magnesium alloy forward extrusion mechanical property |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |