| 离心铸造法制备Al3Ti/Al原位自生功能梯度复合材料 |
| |
| 引用本文： | 李健,陈体军,郝远,袁承人.离心铸造法制备Al3Ti/Al原位自生功能梯度复合材料[J].热加工工艺,2007,36(5):31-34. |
| |
| 作者姓名： | 李健 陈体军 郝远 袁承人 |
| |
| 作者单位： | 兰州理工大学,甘肃省有色金属新材料省部共建国家重点实验室,甘肃,兰州,730050 |
| |
| 摘 要： | 采用离心铸造法，用TiO2粉末与纯铝熔液原位反应生成Al3Ti颗粒增强相，获得了组织和性能在径向上呈梯度分布的Al3Ti/Al功能梯度复合材料。考察了材料的显微组织和硬度，Al3Ti颗粒和材料硬度在径向上由外向内呈梯度分布。研究分析了离心和转速、TiO2加入量和激冷强度对复合材料组织和硬度的分布梯度的影响。结果表明，这些因素对复合材料组织和性能分布梯度的影响较大。
|
| 关 键 词： | 功能梯度复合材料(FGM) 离心铸造 原位反应 Al3Ti颗粒 |
| 文章编号： | 1001-3814(2007)01-0031-04 |
| 修稿时间： | 2006-10-20 |
In-situ Functionally Graded Al3Ti/Al Composites Prepared by Centrifugal Casting |
| |
| LI Jian,CHEN Ti-jun,HAO Yuan,YUAN Cheng-ren.In-situ Functionally Graded Al3Ti/Al Composites Prepared by Centrifugal Casting[J].Hot Working Technology,2007,36(5):31-34. |
| |
| Authors: | LI Jian CHEN Ti-jun HAO Yuan YUAN Cheng-ren |
| |
| Affiliation: | State Key Lab of Gansu New Nonferrous Metal Materials, Lanzhou University of Technology, Lanzhou 730050, China |
| |
| Abstract: | Al3Ti reinforcement particles were produced by in-situ reaction between TiO2 powder and molten aluminium,and in-situ functionally graded Al3Ti /Al composites were prepared by centrifugal casting.The microstructure and the hardness of the materials were investigated,Al3Ti particles and the composites' hardness present as graded distribution along the radial direction.The effects of centrifuge rotate speed,TiO2 input quantity and chilling rate on the distribution gradients of the hardness and the composites' structure morphology were studied.The results show that they have a great influence on the distribution gradients of microstructure and hardness. |
| |
| Keywords: | functionally graded materials(FGM) centrifugal casting in-situ reaction Al3Ti particles |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
