Wear resistance of a Cr3C2-NiCr detonation spray coating

Coatings can be applied to surfaces to improve the surface characteristics over those of the bulk properties and are widely used in tribological applications either to reduce wear and/or to modify friction during contact. One of the foremost coating methods for combating wear is thermal spraying. To prolong the life of steel slab continuous casting rolls, Cr₃C₂-NiCr detonation spray coating was processed on the roll surface in a steelmaking plant in China. This article studies the mechanical properties and wear resistance of this coating. The abrasive and dry frictional wear testing were performed using a pin-on-disk tester. Experimental results show that the wear resistance of the coated samples, i.e., coating reduces the risk of seizure compared to uncoated samples, is much better than those of the uncoated steel at room and elevated temperatures with any load and sliding velocity. The coating wear mechanisms under different test conditions are discussed.