| Mo-Ni-B系三元硼化物陶瓷涂层激光熔覆制备及其腐蚀性能 |
| |
| 引用本文： | 代宽宽,宋光明,吴钱林,李文戈.Mo-Ni-B系三元硼化物陶瓷涂层激光熔覆制备及其腐蚀性能[J].腐蚀与防护,2012(5):375-377,389. |
| |
| 作者姓名： | 代宽宽 宋光明 吴钱林 李文戈 |
| |
| 作者单位： | 上海海事大学物流工程学院;上海海事大学海洋材料科学与工程研究院 |
| |
| 基金项目： | 国家自然科学基金(No.51172140);上海市教委科研创新重点项目(No.11ZZ141);上海市教委优青项目(No.SHS10079) |
| |
| 摘 要： | 采用激光熔覆技术在Q235钢表面原位合成了Mo2NiB2陶瓷涂层。利用扫描电镜和静态浸泡法、电化学方法研究了涂层的显微组织及耐腐蚀性能。结果表明,涂层与基材形成了良好的冶金结合,组织致密,增强相分布较为均匀且无明显的裂纹和孔洞。在3.5%NaCl溶液中,涂层的腐蚀电位明显比基材正移,腐蚀电流密度约为基材的1/4,说明Mo2NiB2陶瓷涂层显著提高了基材的耐腐蚀性能。
|
| 关 键 词： | 激光熔覆 Mo-Ni-B三元硼化物 原位合成 腐蚀 |
Corrosion Performance of Mo-Ni-B Ternary Boride Ceramic Coating Prepared by Laser Cladding |
| |
| DAI Kuan-kuan,SONG Guang-ming,WU Qian-lin,LI Wen-ge.Corrosion Performance of Mo-Ni-B Ternary Boride Ceramic Coating Prepared by Laser Cladding[J].Corrosion & Protection,2012(5):375-377,389. |
| |
| Authors: | DAI Kuan-kuan SONG Guang-ming WU Qian-lin LI Wen-ge |
| |
| Affiliation: | 1.Logistics Engineering College,Shanghai Maritime University,Shanghai 201306,China; 2.Institute of Marine Materials Science and Engineering,Shanghai Maritime University,Shanghai 201306,China) |
| |
| Abstract: | The Mo2NiB2 ternary boride ceramic coating was in-situ prepared on the surface of Q235 steel by laser cladding.The microstructure and corrosion behavior of the coating were investigated by SEM,immersion and electrochemical methods.The results showed that the coating exhibited good metallurgical bond at the interface,no obvious cracks and holes were found,and the reinforced phase distribution was uniform.Compared with the substrate,the coating showed one-forth corrosion current density and the corrosion potential shifted positively in 3.5% NaCl solution,indicating that the coating significantly improved the corrosion resistance of the substrate. |
| |
| Keywords: | laser cladding Mo-Ni-B ternary boride in-situ synthesis corrosion |
| 本文献已被 CNKI 等数据库收录！ |
|
