| 氧化镁煅烧温度对磷酸镁生物骨胶固化过程的影响 |
| |
| 引用本文： | 王爱娟,李均明,马安博,蒋百灵,刘林涛,张姣.氧化镁煅烧温度对磷酸镁生物骨胶固化过程的影响[J].材料热处理学报,2012,33(7):5-8. |
| |
| 作者姓名： | 王爱娟 李均明 马安博 蒋百灵 刘林涛 张姣 |
| |
| 作者单位： | 西安理工大学材料科学与工程学院,陕西西安,710048 |
| |
| 基金项目： | 中国博士后基金面上资助项目，中国教育部博士点基金，陕西省教育厅专项科研计划项目 |
| |
| 摘 要： | 研究了氧化镁煅烧温度对磷酸镁生物骨胶固化过程的影响规律,采用比表面积—孔隙率分析仪、扫描电镜表征煅烧前后氧化镁颗粒的比表面积、孔隙率及微观结构,采用维卡仪及红外测温仪测量磷酸镁生物骨胶固化时间和温度变化情况。结果表明,随着煅烧温度的增加,氧化镁的颗粒尺寸逐渐增加、比表面积和孔体积减小、化学活性降低,致使生物骨胶固化时间延长;煅烧温度的升高,磷酸镁生物骨胶固化过程中温度最高值出现时间延长,且其数值逐渐降低。
|
| 关 键 词： | 氧化镁 煅烧温度 磷酸镁生物骨胶 |
Effect of magnesium oxide calcining temperatures on setting process of magnesium phosphate bone adhesive |
| |
| WANG Ai-juan,LI Jun-ming,MA An-bo,JIANG Bai-ling,LIU Lin-tao,ZHANG Jiao.Effect of magnesium oxide calcining temperatures on setting process of magnesium phosphate bone adhesive[J].Transactions of Materials and Heat Treatment,2012,33(7):5-8. |
| |
| Authors: | WANG Ai-juan LI Jun-ming MA An-bo JIANG Bai-ling LIU Lin-tao ZHANG Jiao |
| |
| Affiliation: | (School of Materials Science and Engineering,Xi’an University of Technology,Xi’an 710048,China) |
| |
| Abstract: | Effect of magnesium oxide calcining temperatures on setting process of magnesium phosphate bone adhesive was studied.The specific surface area,pore volume and microstructure of magnesium oxide were determined by surface area analyzer and scanning electron microscope.The setting time and temperature variation were characterized using automatic Vicat apparatus and infrared radiation thermometer.The results indicate that the specific surface area,total pore volume and bioactivity of magnesium oxide decrease with the increasing of calcining temperature,thus resulting in the increase of setting time.Besides,the time corresponding to the maximum temperature during the setting increases and the maximum temperature decreases with the increasing of magnesium oxide calcining temperature. |
| |
| Keywords: | magnesium oxide calcining temperature magnesium phosphate bone adhesive |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
