| AZ31镁合金热成形及退火过程的组织与织构 |
| |
| 引用本文： | 杨平,任学平,赵祖德. AZ31镁合金热成形及退火过程的组织与织构[J]. 材料热处理学报, 2003, 24(4): 12-16 |
| |
| 作者姓名： | 杨平 任学平 赵祖德 |
| |
| 作者单位： | 1. 北京科技大学,材料科学与工程学院,北京,100083
2. 中国兵器工业第59所,重庆,400083 |
| |
| 基金项目： | 国家自然科学基金资助 (50 1 71 0 0 9)，国家“863”计划资助(2 0 0 2AA30 550 1 ) |
| |
| 摘 要： | 研究了热轧板及不同挤压比的热挤压棒的组织和织构特征 ,确定了热挤压时 <110 0 >织构随应变的加大取代 <112 0 >织构的原因。分析了退火对热成形组织及织构的影响 ,确定了 <110 0 >织构的消失与残余形变晶粒再结晶的联系。估算了退火时两类样品的平均晶粒长大速度并讨论了其与织构的关系。综合分析表明 ,AZ31镁合金热成形后总产生较强的织构 ,织构提高了热成形后的力学性能。高温退火虽使织构减弱 ,但伴随晶粒的明显长大。
|
| 关 键 词： | 镁合金 织构 热成形 退火 显微组织 |
| 文章编号： | 1009-6264(2003)04-0012-05 |
Microstructures and Textures in Hot Deformed and Annealed AZ31 Magnesium Alloy |
| |
| YANG Ping ,REN Xue-ping ,ZHAO Zu-de. Microstructures and Textures in Hot Deformed and Annealed AZ31 Magnesium Alloy[J]. Transactions of Materials and Heat Treatment, 2003, 24(4): 12-16 |
| |
| Authors: | YANG Ping REN Xue-ping ZHAO Zu-de |
| |
| Affiliation: | YANG Ping 1,REN Xue-ping 1,ZHAO Zu-de 2 |
| |
| Abstract: | The microstructures and textures of hot deformed AZ31 magnesium alloy and the influences of annealing were investigated. The replacement of <1120> texture by <1100> with the increase of strain was detected and explained. The vanishing of <1100> texture during annealing was related with the recrystallization in deformed elongate grains which survived the hot extrusion. The average grain growth rates of annealed bars and plate were estimated and discussed in terms of the influence of texture. It is shown that strong texture always exists during hot deformation and contributes to mechanical properties of AZ31 magnesium alloy. A higher annealing temperature in extruded bars may lead to the weakness of texture and abnormal grain growth. |
| |
| Keywords: | magnesium alloy texture hot deformation annealing microstructure |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
