| 基于UG的介入导管挤出模CAD系统开发 |
| |
| 引用本文： | 隋鹏举,郭丽华.基于UG的介入导管挤出模CAD系统开发[J].模具制造,2007,7(8):11-13. |
| |
| 作者姓名： | 隋鹏举 郭丽华 |
| |
| 作者单位： | 1. 莱阳农学院机电工程学院,山东青岛,266109
2. 东南大学 |
| |
| 摘 要： | 针对介入导管的特点设计了其专用挤出模,并选择UGNX 2.0作为介入导管挤出模CAD系统的二次开发平台,完成了基于UG的介入导管挤出模CAD系统的开发.
|
| 关 键 词： | 介入导管 挤出模 UG 二次开发 介入导管 挤出模 系统开发 Based Catheter Interventional CAD System Extruding 开发平台 UGNX 选择 设计 |
Development of Extruding Die CAD System for the Interventional Catheter Based on UG |
| |
| Sui Pengju.Development of Extruding Die CAD System for the Interventional Catheter Based on UG[J].Die & Mould Manufacture,2007,7(8):11-13. |
| |
| Authors: | Sui Pengju |
| |
| Abstract: | A special kind of extruding die was designed for the interventional catheter. UGNX 2.0 was chosen as the secondary development platform of the extruding die CAD system, finally, development of extruding die CAD system for the interventional catheter based on UG was fulfilled. |
| |
| Keywords: | interventional catheter extruding die UG secondary development |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
