| 4线插座护套注射模设计 |
| |
| 引用本文： | 孟玉喜.4线插座护套注射模设计[J].模具制造,2009,9(8):18-22. |
| |
| 作者姓名： | 孟玉喜 |
| |
| 作者单位： | 南通友星机电工业有限公司技术中心,江苏南通,226008 |
| |
| 摘 要： | 分析了4线插座护套模具设计时的要点与难点，介绍了塑件成型工艺，浇注系统和模具结构的设计，注射成型时工艺参数的确定。
|
| 关 键 词： | 工艺分析 浇注系统 合页成形 内部工作钩 外部工作钩 注射模结构 |
Design of Plastics Injection Mold for 4-Pole Female Housing |
| |
| Meng Yuxi.Design of Plastics Injection Mold for 4-Pole Female Housing[J].Die & Mould Manufacture,2009,9(8):18-22. |
| |
| Authors: | Meng Yuxi |
| |
| Abstract: | Main and difficult points in designing 4-pin socket housing injection mold are analyzed.The plastic molding process,design of injecting system and mold structure,and determination of process parameters during plastic molding are introduced. |
| |
| Keywords: | process analysis injecting system hinge formation internal hook external hook injection mold structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
