| 钢基表面激光熔覆Fe3Al的组织结构 |
| |
| 引用本文： | 吴惠英,程广萍,何宜柱.钢基表面激光熔覆Fe3Al的组织结构[J].热处理,2004,19(3):31-34. |
| |
| 作者姓名： | 吴惠英 程广萍 何宜柱 |
| |
| 作者单位： | 安徽工业大学激光加工中心,安徽,马鞍山,243002 |
| |
| 基金项目： | 安徽省教育厅资助自然科学项目(2003KJ055) |
| |
| 摘 要： | 以纯Fe3Al粉为原料，采用预置方式在钢基体表面激光溶覆Fe3Al金属间化合物。利用金相显微镜、扫锚电镜与X衍射试验方法对熔覆合金层、合金层与钢基体的结合界面等进行了显微组织与相结构的分析。试验结果获得了致密、无肉眼可见气孔、夹杂、熔覆表面有一定起伏的合金层，合金层与基体间完全冶金结合；熔覆合金层由单相Fe3Al构成，覆层组织为粗大的柱状晶团，柱状晶团内包含大量极细小的板条状Fe3Al晶粒，一些相邻的板条晶之间具有基本相同的晶体学取向。熔覆合金层显微硬度约为500HV。
|
| 关 键 词： | Fe3Al 合金层 激光熔覆 钢基体 柱状晶 表面 覆层 原料 X衍射 晶粒 |
| 文章编号： | 1008-1690(2004)03-0031-004 |
| 修稿时间： | 2004年3月1日 |
The Surface Microstructure of Steel-based Material after Laser-cladding Fe3Al |
| |
| WU Hui-ying,CHENG Guang-ping,HE Yi-zhu.The Surface Microstructure of Steel-based Material after Laser-cladding Fe3Al[J].Heat Treatment,2004,19(3):31-34. |
| |
| Authors: | WU Hui-ying CHENG Guang-ping HE Yi-zhu |
| |
| Abstract: | The intermatallic compound of Fe 3Al is Laser-clad on steel-based surface by using pure powder of Fe 3Al as raw materiul and by the way of prepositioning.The microstructure and phase structure of the clad alloyinglayer and alloying layer-matrix interface were analyzed by metallographic microscope,SEM and XRD.Tight alloying layer with undulation and without visual pocket and inclusion has been obtained by experiment.The alloying layer is metallurgically combined with the matrix.The clad alloying layer consists of single-phase Fe 3Al and is coarse columnar grain composed of a lot of fine lath Fe 3Al grains.A number of adjacent lath grains will possess the same crystal orientation.Microhardness of the clad alloying layer will be about 500HV. |
| |
| Keywords: | laser cladding Fe 3Al intermetallic compound |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
