GH4169电解磨削加工试验研究 |
| |
引用本文: | 张庆良,汪浩,曲宁松,朱荻. GH4169电解磨削加工试验研究[J]. 电加工与模具, 2016, 0(4): 21-25. DOI: 10.3969/j.issn.1009-279X.2016.04.005 |
| |
作者姓名: | 张庆良 汪浩 曲宁松 朱荻 |
| |
作者单位: | 南京航空航天大学机电学院,江苏南京,210016 |
| |
基金项目: | 国家自然科学基金资助项目(51175258) |
| |
摘 要: | 采用电解液从阴极内孔直接喷射到工件加工表面的内喷射供液方式,对GH4169镍基高温合金开展电解磨削加工试验研究。结果表明:在相同工艺参数下提高进给速度,不仅能提高材料去除率,还能降低过切量和表面粗糙度值;加工电压、电解液温度、电解液压力、金刚石目数对最大进给速度具有重要影响。
|
关 键 词: | 电解磨削 GH4169 最大进给速度 |
Experimental Investigation on GH4169 by Electrochemical Grinding |
| |
Abstract: | The experimental investigation of electrochemical grinding on GH4169 through injecting electrolyte directly to the machining surface of the workpiece has been done. The results showed that with the increase of feed rate,the material remove rate could be improved and the overcut and surface roughness would be decreased. The effect of voltage ,temperature and pressure of electrolyte ,the grit size of diamond on the maximum feed rate were also demonstrated. |
| |
Keywords: | electrochemical grinding GH4169 maximum feed rate |
本文献已被 CNKI 万方数据 等数据库收录! |
|