| 一个四面抽芯制件的注射模设计 |
| |
| 引用本文： | 黄晨华.一个四面抽芯制件的注射模设计[J].电加工与模具,2005(6):58-60. |
| |
| 作者姓名： | 黄晨华 |
| |
| 作者单位： | 韶关学院机电系,广东韶关,512005 |
| |
| 摘 要： | 分析了制品的成形工艺，设计了一模四腔、四面抽芯的注射模具，巧妙地把侧抽芯机构和顶出机构设计成一个机构，有效地克服了由于空间狭小而造成内抽芯的困难。试生产证明，该设计是有效的。
|
| 关 键 词： | 一模多腔 侧抽芯 注射模设计 |
| 修稿时间： | 2005年7月29日 |
Design of the Injection Mould of a Four-sides Core-pulling Production |
| |
| Huang Chenhua.Design of the Injection Mould of a Four-sides Core-pulling Production[J].Electromachining & Mould,2005(6):58-60. |
| |
| Authors: | Huang Chenhua |
| |
| Abstract: | Analysised the process parameters,designed a four cavities injection mould of four-sides core-pulling.A clever mechanism integrated side core-pullingmechanism and pushing-mechanism was designed.The mould was proved work in the practice. |
| |
| Keywords: | many cavities in a mould side core-pulling design of injection mould |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
