| 微细轴放电反拷成形方式的比较研究 |
| |
| 引用本文： | 张天鹏,云乃彰,陈建宁.微细轴放电反拷成形方式的比较研究[J].电加工与模具,2006(4):29-31. |
| |
| 作者姓名： | 张天鹏 云乃彰 陈建宁 |
| |
| 作者单位： | 南京航空航天大学机电学院,江苏南京,210016 |
| |
| 摘 要： | 阐述了放电反拷加工在微细轴、微细孔加工中的重要作用，介绍了4种常见的放电反拷加工方式。分析了不同进给方式对放电反拷加工结果的影响，给出了选择其中一种进给方式加工的微细轴实例。
|
| 关 键 词： | 微细轴 反拷 径向进给 切向进给 轴向进给 圆周摇动进给 |
| 收稿时间： | 2006-03-01 |
| 修稿时间： | 2006年3月1日 |
Comparison of the Different Copy Machining of Micro-rods by Micro-EDM |
| |
| Zhang Tianpeng,Yun Naizhang,Chen Jianning.Comparison of the Different Copy Machining of Micro-rods by Micro-EDM[J].Electromachining & Mould,2006(4):29-31. |
| |
| Authors: | Zhang Tianpeng Yun Naizhang Chen Jianning |
| |
| Affiliation: | Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China |
| |
| Abstract: | The importance of the copy machining of micro-rods by micro-EDM is introduced firstly in this paper. Then expounding four methods of the copy machining in common use and analyzing the effect of the different feeding methods to the results. Finally, machining a micro-rod by one of the four methods. |
| |
| Keywords: | micro-rods copy machining radial feeding tangential feeding axial feeding circumferential feeding |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
