| 铝合金小弯曲半径管内压推弯成形过程的数值模拟 |
| |
| 引用本文： | 曾元松,李志强.铝合金小弯曲半径管内压推弯成形过程的数值模拟[J].塑性工程学报,2003,10(2):14-17. |
| |
| 作者姓名： | 曾元松 李志强 |
| |
| 作者单位： | 北京航空制造工程研究所,北京,100024 |
| |
| 基金项目： | 航空基金(00H25004) |
| |
| 摘 要： | 介绍了小弯曲半径管内压推弯成形的基本原理,并采用有限元法对成形过程进行了模拟,获得了内压力和摩擦条件等主要工艺参数对成形过程的影响规律,对可能出现的成形缺陷进行了预测,并深入分析了引起缺陷的内在原因,所得结果与试验吻合较好。
|
| 关 键 词： | 内压推弯 小弯曲半径管 铝合金 有限元模拟 |
| 文章编号： | 1007-2012(2003)02-0014-04 |
| 修稿时间： | 2002年7月25日 |
Numerical simulation of the internal pressure bending process of small bend radius aluminum alloy tubular parts |
| |
| ZENG Yuan-song LI Zhi-qiang.Numerical simulation of the internal pressure bending process of small bend radius aluminum alloy tubular parts[J].Journal of Plasticity Engineering,2003,10(2):14-17. |
| |
| Authors: | ZENG Yuan-song LI Zhi-qiang |
| |
| Abstract: | The forming principle of the internal pressure bending process of small bend radius aluminum alloy tubular parts is introduced in this paper. Finite element method (FEM) is used to simulate the forming process. The influence of the main process parameters such as the internal pressure and the friction condition on the forming process are investigated, and forming defects are predicted and the internal reason to the defects are deeply analyzed. Numerical results are in good agreement with experimental values. |
| |
| Keywords: | internal pressure tube-bending small bend radius tube aluminum alloy FE simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
