| 缩径过程中的壁厚变化实验 |
| |
| 引用本文： | 彭俊阳,付渊,陈景松,王勇,王仲仁.缩径过程中的壁厚变化实验[J].塑性工程学报,2012,19(3):60-63. |
| |
| 作者姓名： | 彭俊阳 付渊 陈景松 王勇 王仲仁 |
| |
| 作者单位： | 1. 哈尔滨工业大学材料学院,哈尔滨,150001
2. 上海大众汽车有限公司,上海,201805 |
| |
| 摘 要： | 对缩径工艺进行实验,研究了缩径过程中壁厚分布以及最大轴向力的变化规律。实验中选取不同的管坯直径,获取了不同的缩径系数。通过分析变形区内壁厚变化规律,特别是最终壁厚变化规律,确定了最大缩径力以及极限缩径系数。为验证理论计算结果的准确性,对实验结果与理论计算结果进行了比较。结果表明,增量理论的计算结果更加接近实验结果。
|
| 关 键 词： | 缩径 载荷 缩径成形力 壁厚变化 缩径系数 |
Experimental investigation on thickness changes during necking process |
| |
| PENG Jun-yang
,
FU Yuan
,
CHEN Jing-song
,
WANG Yong
,
WANG Zhong-ren.Experimental investigation on thickness changes during necking process[J].Journal of Plasticity Engineering,2012,19(3):60-63. |
| |
| Authors: | PENG Jun-yang FU Yuan CHEN Jing-song WANG Yong WANG Zhong-ren |
| |
| Affiliation: | 5(School of Materials Science & Engineering,Harbin Institute of Technology,Harbin 150001 China) CHEN Jing-song3(Shanghai Volkswagen Automotive Co.,Ltd,Shanghai 201805 China) |
| |
| Abstract: | Through experimental study of necking process,thickness changes and maximum axial stress during the process were investigated.Different necking coefficients were achieved by using tubes of different diameters.In the experimental study,thickness changes in deformation zone were analyzed,especially for the final thickness changes.The maximum necking force and the limit necking coefficient were investigated.The results of experimental study and calculation were compared to verify the accuracy of calculated results.It shows that the calculation results based on incremental theory is more closer to the experimental results. |
| |
| Keywords: | necking loads necking force thickness changes necking coefficient |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
