首页 | 本学科首页   官方微博 | 高级检索  
     

纳米陶瓷超塑加工成形的研究进展
引用本文:张凯锋,骆俊廷,陈国清,王国锋.纳米陶瓷超塑加工成形的研究进展[J].塑性工程学报,2003,10(1):1-3.
作者姓名:张凯锋  骆俊廷  陈国清  王国锋
作者单位:哈尔滨工业大学材料科学与工程学院,哈尔滨,150001
摘    要:在对纳米陶瓷超塑性拉伸研究进行总结的基础上 ,综述了陶瓷超塑成形的研究进展情况。指出 :陶瓷材料由于其超塑特性 ,所以能够用各种现有的金属塑性成形方法来成形。最佳成形温度范围大约在 12 0 0℃~ 15 0 0℃之间 ,最佳晶粒平均直径为 10 0nm~ 2 0 0nm。

关 键 词:纳米陶瓷  超塑性拉伸  超塑成形  塑性成形
文章编号:1007-2012(2003)01-0001-03
修稿时间:2002年5月8日

The research and development of nanophase ceramic superplastic forming
ZHANG Kai\|feng,LUO Jun\|ting,CHEN Guo\|qing,WANG Guo\|feng.The research and development of nanophase ceramic superplastic forming[J].Journal of Plasticity Engineering,2003,10(1):1-3.
Authors:ZHANG Kai\|feng  LUO Jun\|ting  CHEN Guo\|qing  WANG Guo\|feng
Abstract:The research development of superplastic forming(SPF)has been summarized in this article lying on the generalization of ceramic superplastic elongation.It presents that ceramic materials can be formed by all kinds of traditional plastic forming method due to the superplasticity.Optimum forming temperature is 1200℃~1500℃ and optimum average diameter of grains is 100nm~200nm.
Keywords:nanophase ceramic  superplastic elongation  superplastic forming  plastic forming
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号