| 临钢板坯三角区裂纹的形成因素及控制 |
| |
| 引用本文： | 巨建涛,张朝晖,金波,王海江,杨建洲,张志华.临钢板坯三角区裂纹的形成因素及控制[J].上海金属,2007,29(4):41-44. |
| |
| 作者姓名： | 巨建涛 张朝晖 金波 王海江 杨建洲 张志华 |
| |
| 作者单位： | 1. 西安建筑科技大学,冶金工程学院,陕西西安,710055
2. 太钢集团临汾钢铁公司 |
| |
| 摘 要： | 通过对临钢板坯产生三角区裂纹试样的分析,从生产工艺、设备等方面分析得出结晶器锥度、铸机开口度、钢中S含量、拉速以及浇注温度等因素是影响当前三角区裂纹的主要原因,并针对上述影响因素提出相应的控制措施。
|
| 关 键 词： | 连铸板坯 三角区裂纹 形成因素 控制措施 |
| 修稿时间： | 2007-03-14 |
THE FORMATION FACTOR OF TRIANGULAR AREA CRACK IN CONTINUOUS CASTING SLAB AND ITS CONTROL MEASURE |
| |
| Ju Jiantao,Zhang Zhaohui,Jin Bo,Wang Haijiang,Yang Jianzhou,Zhang Zhihua.THE FORMATION FACTOR OF TRIANGULAR AREA CRACK IN CONTINUOUS CASTING SLAB AND ITS CONTROL MEASURE[J].Shanghai Metals,2007,29(4):41-44. |
| |
| Authors: | Ju Jiantao Zhang Zhaohui Jin Bo Wang Haijiang Yang Jianzhou Zhang Zhihua |
| |
| Abstract: | The influence factors of triangular area crack were studied by analyzing the triangular area crack in the samples of CC slab from Lin Steel Group. It was considered that the mould taper, caster open range, sulphur content of steel, casting rate and pouring temperature were the major influence factors on the formation of triangular area crack, some corresponding control measures were presented. |
| |
| Keywords: | Measure Continuous Casting Slab Triangular Area Crack Formation Factor Control |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
